The POWER block of the STM32MP1 integrates 3 fixed regulators with a ready status bit for each one. The goal of this patchset is to add support those regulators. Pascal Paillet (2): changes in v2: * add COMPILE_TEST switch * do not test ready in is_enabled() callback * remove of_regulator_match * change author dt-bindings: regulator: Add stm32mp1 pwr regulators regulator: Add support for stm32 power regulators .../bindings/regulator/st,stm32mp1-pwr-reg.txt | 43 +++++ drivers/regulator/Kconfig | 7 + drivers/regulator/Makefile | 1 + drivers/regulator/stm32-pwr.c | 190 +++++++++++++++++++++ 4 files changed, 241 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.txt create mode 100644 drivers/regulator/stm32-pwr.c -- 1.9.1
