[PATCH v5 5/5] arm64: allwinner: dts: h6: enable USB3 port on Pine H64

[Icenowy Zheng <icenowy@xxxxxxx>]

Pine H64 board have a USB3 port, which is connected to the USB3 pins of
the H6 SoC, and the 5V power supply is controlled via GPIO (shared with
the power USB ports).

Enable this port.

Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx>
Reviewed-by: Chen-Yu Tsai <wens@xxxxxxxx>
---
Changes in v5:
- Migrated to connector subnode.

No changes in v4.

Changes in v3:
- Added Chen-Yu's Review tag. 
.../arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
index bdb8470fc8dc..d03e20ee1cc3 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
@@ -95,6 +95,10 @@
 	};
 };
 
+&dwc3 {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -267,3 +271,12 @@
 	usb3_vbus-supply = <&reg_usb_vbus>;
 	status = "okay";
 };
+
+&usb3phy {
+	status = "okay";
+
+	connector {
+		compatible = "usb-a-connector";
+		vbus-supply = <&reg_usb_vbus>;
+	};
+};
-- 
2.18.1