The LM3697 is a single function LED driver. The single function LED driver needs to reside in the LED directory as a dedicated LED driver and not as a MFD device. The device does have common brightness and ramp features and those can be accomodated by a TI LMU framework. The LM3697 dt binding needs to be moved from the ti-lmu.txt and a dedicated LED dt binding needs to be added. The new LM3697 LED dt binding will then reside in the Documentation/devicetree/bindings/leds directory and follow the current LED and general bindings guidelines. Signed-off-by: Dan Murphy <dmurphy@xxxxxx> --- v2 - Made changes to reference ti,brightness-resolution to the ti-lmu.txt - https://lore.kernel.org/patchwork/patch/1054501/ .../devicetree/bindings/leds/leds-lm3697.txt | 73 +++++++++++++++++++ .../devicetree/bindings/mfd/ti-lmu.txt | 27 +------ 2 files changed, 74 insertions(+), 26 deletions(-) create mode 100644 Documentation/devicetree/bindings/leds/leds-lm3697.txt diff --git a/Documentation/devicetree/bindings/leds/leds-lm3697.txt b/Documentation/devicetree/bindings/leds/leds-lm3697.txt new file mode 100644 index 000000000000..02378f33c9ab --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-lm3697.txt @@ -0,0 +1,73 @@ +* Texas Instruments - LM3697 Highly Efficient White LED Driver + +The LM3697 11-bit LED driver provides high- +performance backlight dimming for 1, 2, or 3 series +LED strings while delivering up to 90% efficiency. + +This device is suitable for display and keypad Lighting + +Required properties: + - compatible: + "ti,lm3697" + - reg : I2C slave address + - #address-cells : 1 + - #size-cells : 0 + +Optional properties: + - enable-gpios : GPIO pin to enable/disable the device + - vled-supply : LED supply + +Required child properties: + - reg : 0 - LED is Controlled by bank A + 1 - LED is Controlled by bank B + - led-sources : Indicates which HVLED string is associated to which + control bank. This is a zero based property so + HVLED1 = 0, HVLED2 = 1, HVLED3 = 2. + Additional information is contained + in Documentation/devicetree/bindings/leds/common.txt + +Optional child properties: + - ti,brightness-resolution - see Documentation/devicetree/bindings/mfd/ti-lmu.txt + - ramp-up-ms: see Documentation/devicetree/bindings/mfd/ti-lmu.txt + - ramp-down-ms: see Documentation/devicetree/bindings/mfd/ti-lmu.txt + - label : see Documentation/devicetree/bindings/leds/common.txt + - linux,default-trigger : + see Documentation/devicetree/bindings/leds/common.txt + +Example: + +HVLED string 1 and 3 are controlled by control bank A and HVLED 2 string is +controlled by control bank B. + +led-controller@36 { + compatible = "ti,lm3697"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x36>; + + enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + vled-supply = <&vbatt>; + + led@0 { + reg = <0>; + led-sources = <0 2>; + ti,brightness-resolution = <2047>; + ramp-up-ms = <5000>; + ramp-down-ms = <1000>; + label = "white:first_backlight_cluster"; + linux,default-trigger = "backlight"; + }; + + led@1 { + reg = <1>; + led-sources = <1>; + ti,brightness-resolution = <255>; + ramp-up-ms = <500>; + ramp-down-ms = <1000>; + label = "white:second_backlight_cluster"; + linux,default-trigger = "backlight"; + }; +} + +For more product information please see the link below: +http://www.ti.com/lit/ds/symlink/lm3697.pdf diff --git a/Documentation/devicetree/bindings/mfd/ti-lmu.txt b/Documentation/devicetree/bindings/mfd/ti-lmu.txt index 5881929d5f7a..a948a8f41b2c 100644 --- a/Documentation/devicetree/bindings/mfd/ti-lmu.txt +++ b/Documentation/devicetree/bindings/mfd/ti-lmu.txt @@ -8,7 +8,6 @@ TI LMU driver supports lighting devices below. LM3632 Backlight and regulator LM3633 Backlight, LED and fault monitor LM3695 Backlight - LM3697 Backlight and fault monitor Required properties: - compatible: Should be one of: @@ -16,11 +15,10 @@ Required properties: "ti,lm3632" "ti,lm3633" "ti,lm3695" - "ti,lm3697" - reg: I2C slave address. 0x11 for LM3632 0x29 for LM3631 - 0x36 for LM3633, LM3697 + 0x36 for LM3633 0x63 for LM3695 Optional property: @@ -51,7 +49,6 @@ Optional nodes: Required properties: - compatible: Should be one of: "ti,lm3633-fault-monitor" - "ti,lm3697-fault-monitor" - leds: LED properties for LM3633. Please refer to [2]. - regulators: Regulator properties for LM3631 and LM3632. Please refer to [3]. @@ -216,25 +213,3 @@ lm3695@63 { }; }; }; - -lm3697@36 { - compatible = "ti,lm3697"; - reg = <0x36>; - - enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>; - - backlight { - compatible = "ti,lm3697-backlight"; - - lcd { - ti,brightness-resolution = <255>; - led-sources = <0 1 2>; - ramp-up-ms = <200>; - ramp-down-ms = <200>; - }; - }; - - fault-monitor { - compatible = "ti,lm3697-fault-monitor"; - }; -}; -- 2.19.0
