Document RZ/G1C (R8A77470) SoC bindings.
For RZ/G1C, this driver is used to enable interrupt generation and
initializing timing registers which is part of phy_init code.
Signed-off-by: Biju Das <biju.das@xxxxxxxxxxxxxx>
---
V2-->V3
* New patch
https://patchwork.kernel.org/patch/10879899/
---
Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
index ad9c290..23894db 100644
--- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
+++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
@@ -1,10 +1,12 @@
* Renesas R-Car generation 3 USB 2.0 PHY
This file provides information on what the device node for the R-Car generation
-3 and RZ/G2 USB 2.0 PHY contain.
+3, RZ/G1C and RZ/G2 USB 2.0 PHY contain.
Required properties:
-- compatible: "renesas,usb2-phy-r8a774a1" if the device is a part of an R8A774A1
+- compatible: "renesas,usb2-phy-r8a77470" if the device is a part of an R8A77470
+ SoC.
+ "renesas,usb2-phy-r8a774a1" if the device is a part of an R8A774A1
SoC.
"renesas,usb2-phy-r8a774c0" if the device is a part of an R8A774C0
SoC.
--
2.7.4
