Custom device tree property "<name>-fixed-regulator" can be removed because, 1) It is not used anywhere in tree. 2) All handlings for "<name>-fixed-regulator" have been removed in UFS driver. 3) There is no issue if an existed regulator defined "<name>-fixed-regulator" property in device tree. Signed-off-by: Stanley Chu <stanley.chu@xxxxxxxxxxxx> --- Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt | 2 -- 1 file changed, 2 deletions(-) diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt index 5111e9130bc3..f3140cffc54d 100644 --- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt +++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt @@ -31,7 +31,6 @@ Optional properties: - vcc-max-microamp : specifies max. load that can be drawn from vcc supply - vccq-max-microamp : specifies max. load that can be drawn from vccq supply - vccq2-max-microamp : specifies max. load that can be drawn from vccq2 supply -- <name>-fixed-regulator : boolean property specifying that <name>-supply is a fixed regulator - clocks : List of phandle and clock specifier pairs - clock-names : List of clock input name strings sorted in the same @@ -63,7 +62,6 @@ Example: interrupts = <0 28 0>; vdd-hba-supply = <&xxx_reg0>; - vdd-hba-fixed-regulator; vcc-supply = <&xxx_reg1>; vcc-supply-1p8; vccq-supply = <&xxx_reg2>; -- 2.18.0
