On Tue, Mar 26, 2019 at 1:00 PM Kishon Vijay Abraham I <kishon@xxxxxx> wrote: > > > > On 22/03/19 10:12 PM, Florian Fainelli wrote: > > On 3/19/19 11:38 AM, Scott Branden wrote: > >> Thanks Srinath and Rob - patch series looks good now. > >> > >> patch series, > >> > >> Acked-by: Scott Branden <scott.branden@xxxxxxxxxxxx> > >> > > > > Kishon, can you let me know when you apply patches 1 and 2 so I can > > queue up patch 3 for inclusion the 5.2 ARM SoC pull request? Thanks! > > merged the dt-binding and sr-usb driver, thanks. Thanks a lot Kishon. Regards, Srinath. > > -Kishon > > > >> > >> On 2019-03-19 2:15 a.m., Srinath Mannam wrote: > >>> These patches add Stingray USB PHY driver and its corresponding > >>> DT nodes with documentation. > >>> > >>> This patch set is based on Linux-5.0-rc2. > >>> > >>> Changes from v5: > >>> - Removed redundant address and size cells in DT nodes. > >>> > >>> Changes from v4: > >>> - Addressed Rob Herring review comments > >>> - Removed child nodes and added #phy-cells 1 > >>> - Added xlate function to get phy using phandle argument. > >>> > >>> Changes from v3: > >>> - Addressed Rob Herring review comments > >>> - Changed compatible strings. > >>> - updated driver based on new compatible strings. > >>> > >>> Changes from v2: > >>> - Addressed Kishon review comments > >>> - Updated patchset to Linux-5.0-rc2 > >>> > >>> Changes from v1: > >>> - Addressed Kishon review comments > >>> - phy init call return value handle > >>> Srinath Mannam (3): > >>> dt-bindings: phy: Add Stingray USB PHY binding document > >>> phy: sr-usb: Add Stingray USB PHY driver > >>> arm64: dts: Add USB DT nodes for Stingray SoC > >>> > >>> .../bindings/phy/brcm,stingray-usb-phy.txt | 32 ++ > >>> .../boot/dts/broadcom/stingray/stingray-usb.dtsi | 72 ++++ > >>> .../arm64/boot/dts/broadcom/stingray/stingray.dtsi | 1 + > >>> drivers/phy/broadcom/Kconfig | 11 + > >>> drivers/phy/broadcom/Makefile | 1 + > >>> drivers/phy/broadcom/phy-bcm-sr-usb.c | 393 > >>> +++++++++++++++++++++ > >>> 6 files changed, 510 insertions(+) > >>> create mode 100644 > >>> Documentation/devicetree/bindings/phy/brcm,stingray-usb-phy.txt > >>> create mode 100644 > >>> arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi > >>> create mode 100644 drivers/phy/broadcom/phy-bcm-sr-usb.c > >>> > > > >
