Re: [PATCH v6 0/3] Stingray USB PHY driver support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 22/03/19 10:12 PM, Florian Fainelli wrote:
> On 3/19/19 11:38 AM, Scott Branden wrote:
>> Thanks Srinath and Rob - patch series looks good now.
>>
>> patch series,
>>
>> Acked-by: Scott Branden <scott.branden@xxxxxxxxxxxx>
>>
> 
> Kishon, can you let me know when you apply patches 1 and 2 so I can
> queue up patch 3 for inclusion the 5.2 ARM SoC pull request? Thanks!

merged the dt-binding and sr-usb driver, thanks.

-Kishon
> 
>>
>> On 2019-03-19 2:15 a.m., Srinath Mannam wrote:
>>> These patches add Stingray USB PHY driver and its corresponding
>>> DT nodes with documentation.
>>>
>>> This patch set is based on Linux-5.0-rc2.
>>>
>>> Changes from v5:
>>>    - Removed redundant address and size cells in DT nodes.
>>>
>>> Changes from v4:
>>>    - Addressed Rob Herring review comments
>>>       - Removed child nodes and added #phy-cells 1
>>>       - Added xlate function to get phy using phandle argument.
>>>
>>> Changes from v3:
>>>    - Addressed Rob Herring review comments
>>>       - Changed compatible strings.
>>>       - updated driver based on new compatible strings.
>>>
>>> Changes from v2:
>>>    - Addressed Kishon review comments
>>>    - Updated patchset to Linux-5.0-rc2
>>>
>>> Changes from v1:
>>>    - Addressed Kishon review comments
>>>    - phy init call return value handle
>>>    Srinath Mannam (3):
>>>    dt-bindings: phy: Add Stingray USB PHY binding document
>>>    phy: sr-usb: Add Stingray USB PHY driver
>>>    arm64: dts: Add USB DT nodes for Stingray SoC
>>>
>>>   .../bindings/phy/brcm,stingray-usb-phy.txt         |  32 ++
>>>   .../boot/dts/broadcom/stingray/stingray-usb.dtsi   |  72 ++++
>>>   .../arm64/boot/dts/broadcom/stingray/stingray.dtsi |   1 +
>>>   drivers/phy/broadcom/Kconfig                       |  11 +
>>>   drivers/phy/broadcom/Makefile                      |   1 +
>>>   drivers/phy/broadcom/phy-bcm-sr-usb.c              | 393
>>> +++++++++++++++++++++
>>>   6 files changed, 510 insertions(+)
>>>   create mode 100644
>>> Documentation/devicetree/bindings/phy/brcm,stingray-usb-phy.txt
>>>   create mode 100644
>>> arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi
>>>   create mode 100644 drivers/phy/broadcom/phy-bcm-sr-usb.c
>>>
> 
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux