From: Qiao Zhou <qiaozhou@xxxxxxxxxxxx>
Add binding documentation for ASR8751C AXI/APB bus that are used
to interface with peripherals. AXI/APB bus follow standard AXI/APB
protocols.
Signed-off-by: qiaozhou <qiaozhou@xxxxxxxxxxxx>
---
Documentation/devicetree/bindings/bus/asr,bus.txt | 42 +++++++++++++++++++++++
1 file changed, 42 insertions(+)
create mode 100644 Documentation/devicetree/bindings/bus/asr,bus.txt
diff --git a/Documentation/devicetree/bindings/bus/asr,bus.txt b/Documentation/devicetree/bindings/bus/asr,bus.txt
new file mode 100644
index 0000000..cbb1b6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/asr,bus.txt
@@ -0,0 +1,42 @@
+* ASR AXI/APB Simple Bus
+
+This file documents core properties in ASR AXI and APB bus.
+
+The ASR8751C SoC has APB and AXI buses for cores to access its
+controllers, suchas i2c, sdh, rtc, clock, power management registers
+etc. Most ASR SoCs share the common architecture for buses.
+Generally APB and AXI bus have a source clock and power control, and
+clock rate can be changed and power can be shutdown in low power mode.
+
+Required properties for AXI bus:
+- compatible: should be "asr,axi-bus", "simple-bus".
+- #address-cells: could be 1, or 2
+- #size-cells: could be 1, or 2
+- reg: iomem address of AXI bus registers
+- ranges: register ranges
+
+Example:
+ axi@d4200000 { /* AXI */
+ compatible = "asr,axi-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0 0xd4200000 0 0x00200000>;
+ ranges = <0 0 0 0xffffffff>;
+
+ };
+
+Required properties for APB bus:
+- compatible: should be "asr,apb-bus", "simple-bus".
+- #address-cells: could be 1, or 2
+- #size-cells: could be 1, or 2
+- reg: iomem address of APB bus registers
+- ranges: register ranges
+
+Example:
+ apb@d4000000 { /* APB */
+ compatible = "asr,apb-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0 0xd4000000 0 0x00200000>;
+ ranges = <0 0 0 0xffffffff>;
+ };
--
2.7.4
