RE: [PATCH V3 05/10] arm64: tegra: fix default tap and trim values

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> >
> > Default tap and trim values are incorrect for Tegra186 SDMMC4.
> > This patch fixes it.
> >
> > Tested-by: Jon Hunter <jonathanh@xxxxxxxxxx>
> > Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
>
> Is this a fix and/or for stable?
>
> In either case, I am leaving this for arm-soc.
>
> Kind regards
> Uffe
>

Thanks Uffe. Yes this is applicable for stable.

> > ---
> >  arch/arm64/boot/dts/nvidia/tegra186.dtsi | 4 ++--
> >  1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi 
> > b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
> > index 97aeb946ed5e..472f55fe9488 100644
> > --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
> > +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
> > @@ -317,8 +317,8 @@
> >                 nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x0a>;
> >                 nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x0a>;
> >                 nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x0a>;
> > -               nvidia,default-tap = <0x5>;
> > -               nvidia,default-trim = <0x9>;
> > +               nvidia,default-tap = <0x9>;
> > +               nvidia,default-trim = <0x5>;
> >                 nvidia,dqs-trim = <63>;
> >                 mmc-hs400-1_8v;
> >                 status = "disabled";
> > --
> > 2.7.4
> >




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux