Re: [PATCH 5/5] media: tvp5150: add support to limit tv norms on connector

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Em Sat,  2 Feb 2019 13:10:04 +0100
Marco Felsch <m.felsch@xxxxxxxxxxxxxx> escreveu:

> The tvp5150 accepts NTSC(M,J,4.43), PAL (B,D,G,H,I,M,N) and SECAM video
> data and is able to auto-detect the input signal. 

Hmm... I'm afraid of this change. As far as I remember, I tested some
weird format variants like V4L2_STD_PAL_60 a long time ago, but there's
no way to force video to use those. The format selection logic simply
places the device on auto-detect mode for those weirdos, and that
works fine at the devices I know.

A change like that may break things. So I would actually have a quirk
to optionally disable auto-detection on devices that this is not know
to work.

> The auto-detection
> does not work if the connector does not receive an input signal and the
> tvp5150 might not be configured correctly. This misconfiguration leads
> into wrong decoded video streams if the tvp5150 gets powered on before
> the video signal is present.
> 
> Limit the supported tv norms according to the actual selected connector
> to avoid a misconfiguration.
> 
> Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
> ---
>  drivers/media/i2c/tvp5150.c | 42 ++++++++++++++++++++++++++++++++++++-
>  1 file changed, 41 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c
> index f3a2ad00a40d..7619793dee67 100644
> --- a/drivers/media/i2c/tvp5150.c
> +++ b/drivers/media/i2c/tvp5150.c
> @@ -32,6 +32,13 @@
>  #define TVP5150_MBUS_FMT	MEDIA_BUS_FMT_UYVY8_2X8
>  #define TVP5150_FIELD		V4L2_FIELD_ALTERNATE
>  #define TVP5150_COLORSPACE	V4L2_COLORSPACE_SMPTE170M
> +#define TVP5150_STD_MASK	(V4L2_STD_NTSC     | \
> +				 V4L2_STD_NTSC_443 | \
> +				 V4L2_STD_PAL      | \
> +				 V4L2_STD_PAL_M    | \
> +				 V4L2_STD_PAL_N    | \
> +				 V4L2_STD_PAL_Nc   | \
> +				 V4L2_STD_SECAM)
>  
>  MODULE_DESCRIPTION("Texas Instruments TVP5150A/TVP5150AM1/TVP5151 video decoder driver");
>  MODULE_AUTHOR("Mauro Carvalho Chehab");
> @@ -74,6 +81,7 @@ struct tvp5150 {
>  	struct media_pad pads[TVP5150_NUM_PADS];
>  	int pads_state[TVP5150_NUM_PADS];
>  	struct tvp5150_connector *connectors;
> +	struct tvp5150_connector *cur_connector;
>  	int connectors_num;
>  	bool modify_second_link;
>  #endif
> @@ -794,17 +802,27 @@ static int tvp5150_g_std(struct v4l2_subdev *sd, v4l2_std_id *std)
>  static int tvp5150_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
>  {
>  	struct tvp5150 *decoder = to_tvp5150(sd);
> +	v4l2_std_id supported_norms =
> +		decoder->cur_connector->base.connector.analog.supported_tvnorms;
>  
>  	if (decoder->norm == std)
>  		return 0;
>  
> +	/*
> +	 * check if requested std or group of std's is/are supported by the
> +	 * connector
> +	 */
> +	if ((supported_norms & std) == 0)
> +		return -EINVAL;
> +
>  	/* Change cropping height limits */
>  	if (std & V4L2_STD_525_60)
>  		decoder->rect.height = TVP5150_V_MAX_525_60;
>  	else
>  		decoder->rect.height = TVP5150_V_MAX_OTHERS;
>  
> -	decoder->norm = std;
> +	/* set only the specific supported std in case of group of std's */
> +	decoder->norm = supported_norms & std;
>  
>  	return tvp5150_set_std(sd, std);
>  }
> @@ -1298,6 +1316,7 @@ static int tvp5150_link_setup(struct media_entity *entity,
>  	int *pad_state = &decoder->pads_state[0];
>  	int i, active_pad, ret = 0;
>  	bool is_svideo = false;
> +	bool update_cur_connector = false;
>  
>  	/*
>  	 * The tvp state is determined by the enabled sink pad link.
> @@ -1344,10 +1363,12 @@ static int tvp5150_link_setup(struct media_entity *entity,
>  				decoder->modify_second_link = false;
>  				tvp5150_s_routing(sd, TVP5150_SVIDEO,
>  						  TVP5150_NORMAL, 0);
> +				update_cur_connector = true;
>  			}
>  		} else {
>  			tvp5150_s_routing(sd, tvp5150_pad->index,
>  					  TVP5150_NORMAL, 0);
> +			update_cur_connector = true;
>  		}
>  	} else {
>  		/*
> @@ -1376,6 +1397,14 @@ static int tvp5150_link_setup(struct media_entity *entity,
>  					  active_pad, TVP5150_BLACK_SCREEN, 0);
>  		decoder->modify_second_link = false;
>  	}
> +
> +	if (update_cur_connector) {
> +		/* Update tvnorm according to connector */
> +		decoder->cur_connector =
> +			container_of(remote, struct tvp5150_connector, pad);
> +		tvp5150_s_std(sd,
> +			decoder->cur_connector->base.connector.analog.supported_tvnorms);
> +	}
>  out:
>  	return ret;
>  }
> @@ -1605,6 +1634,9 @@ static int tvp5150_registered(struct v4l2_subdev *sd)
>  			}
>  			tvp5150_selmux(sd);
>  			decoder->modify_second_link = false;
> +			decoder->cur_connector = &decoder->connectors[i];
> +			tvp5150_s_std(sd,
> +				decoder->connectors[i].base.connector.analog.supported_tvnorms);
>  		}
>  	}
>  #endif
> @@ -1925,6 +1957,14 @@ static int tvp5150_parse_dt(struct tvp5150 *decoder, struct device_node *np)
>  				ret = -EINVAL;
>  				goto err;
>  			}
> +			if (!(c.connector.analog.supported_tvnorms &
> +			    TVP5150_STD_MASK)) {
> +				dev_err(dev,
> +					"Invalid tv norm(s) on connector %s.\n",
> +					c.label);
> +				ret = -EINVAL;
> +				goto err;
> +			}
>  			in++;
>  			break;
>  		case TVP5150_PAD_VID_OUT:



Thanks,
Mauro



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux