The tvp5150 accepts NTSC(M,J,4.43), PAL (B,D,G,H,I,M,N) and SECAM video
data and is able to auto-detect the input signal. The auto-detection
does not work if the connector does not receive an input signal and the
tvp5150 might not be configured correctly. This misconfiguration leads
into wrong decoded video streams if the tvp5150 gets powered on before
the video signal is present.
Limit the supported tv norms according to the actual selected connector
to avoid a misconfiguration.
Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
---
drivers/media/i2c/tvp5150.c | 42 ++++++++++++++++++++++++++++++++++++-
1 file changed, 41 insertions(+), 1 deletion(-)
diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c
index f3a2ad00a40d..7619793dee67 100644
--- a/drivers/media/i2c/tvp5150.c
+++ b/drivers/media/i2c/tvp5150.c
@@ -32,6 +32,13 @@
#define TVP5150_MBUS_FMT MEDIA_BUS_FMT_UYVY8_2X8
#define TVP5150_FIELD V4L2_FIELD_ALTERNATE
#define TVP5150_COLORSPACE V4L2_COLORSPACE_SMPTE170M
+#define TVP5150_STD_MASK (V4L2_STD_NTSC | \
+ V4L2_STD_NTSC_443 | \
+ V4L2_STD_PAL | \
+ V4L2_STD_PAL_M | \
+ V4L2_STD_PAL_N | \
+ V4L2_STD_PAL_Nc | \
+ V4L2_STD_SECAM)
MODULE_DESCRIPTION("Texas Instruments TVP5150A/TVP5150AM1/TVP5151 video decoder driver");
MODULE_AUTHOR("Mauro Carvalho Chehab");
@@ -74,6 +81,7 @@ struct tvp5150 {
struct media_pad pads[TVP5150_NUM_PADS];
int pads_state[TVP5150_NUM_PADS];
struct tvp5150_connector *connectors;
+ struct tvp5150_connector *cur_connector;
int connectors_num;
bool modify_second_link;
#endif
@@ -794,17 +802,27 @@ static int tvp5150_g_std(struct v4l2_subdev *sd, v4l2_std_id *std)
static int tvp5150_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
{
struct tvp5150 *decoder = to_tvp5150(sd);
+ v4l2_std_id supported_norms =
+ decoder->cur_connector->base.connector.analog.supported_tvnorms;
if (decoder->norm == std)
return 0;
+ /*
+ * check if requested std or group of std's is/are supported by the
+ * connector
+ */
+ if ((supported_norms & std) == 0)
+ return -EINVAL;
+
/* Change cropping height limits */
if (std & V4L2_STD_525_60)
decoder->rect.height = TVP5150_V_MAX_525_60;
else
decoder->rect.height = TVP5150_V_MAX_OTHERS;
- decoder->norm = std;
+ /* set only the specific supported std in case of group of std's */
+ decoder->norm = supported_norms & std;
return tvp5150_set_std(sd, std);
}
@@ -1298,6 +1316,7 @@ static int tvp5150_link_setup(struct media_entity *entity,
int *pad_state = &decoder->pads_state[0];
int i, active_pad, ret = 0;
bool is_svideo = false;
+ bool update_cur_connector = false;
/*
* The tvp state is determined by the enabled sink pad link.
@@ -1344,10 +1363,12 @@ static int tvp5150_link_setup(struct media_entity *entity,
decoder->modify_second_link = false;
tvp5150_s_routing(sd, TVP5150_SVIDEO,
TVP5150_NORMAL, 0);
+ update_cur_connector = true;
}
} else {
tvp5150_s_routing(sd, tvp5150_pad->index,
TVP5150_NORMAL, 0);
+ update_cur_connector = true;
}
} else {
/*
@@ -1376,6 +1397,14 @@ static int tvp5150_link_setup(struct media_entity *entity,
active_pad, TVP5150_BLACK_SCREEN, 0);
decoder->modify_second_link = false;
}
+
+ if (update_cur_connector) {
+ /* Update tvnorm according to connector */
+ decoder->cur_connector =
+ container_of(remote, struct tvp5150_connector, pad);
+ tvp5150_s_std(sd,
+ decoder->cur_connector->base.connector.analog.supported_tvnorms);
+ }
out:
return ret;
}
@@ -1605,6 +1634,9 @@ static int tvp5150_registered(struct v4l2_subdev *sd)
}
tvp5150_selmux(sd);
decoder->modify_second_link = false;
+ decoder->cur_connector = &decoder->connectors[i];
+ tvp5150_s_std(sd,
+ decoder->connectors[i].base.connector.analog.supported_tvnorms);
}
}
#endif
@@ -1925,6 +1957,14 @@ static int tvp5150_parse_dt(struct tvp5150 *decoder, struct device_node *np)
ret = -EINVAL;
goto err;
}
+ if (!(c.connector.analog.supported_tvnorms &
+ TVP5150_STD_MASK)) {
+ dev_err(dev,
+ "Invalid tv norm(s) on connector %s.\n",
+ c.label);
+ ret = -EINVAL;
+ goto err;
+ }
in++;
break;
case TVP5150_PAD_VID_OUT:
--
2.20.1
