This patch series adds support for I2CXL-MaxSonar ultrasonic distance
sensors with i2c interface of vendor MaxBotix
Supported types are:
mb1202, mb1212, mb1222, mb1232, mb1242, mb7040, mb7137
Implemented and tested functionality:
- reading the distance via in_distance_raw
- buffered mode with trigger
- make use of irq to announce completion of ranging
Changes in v3:
Thanks to the review of Julia, Jonathan, Rob and Peter there are some
changes:
- fix missing mutex_unlock() in mb1232_read_distance()
- change file and function names to the tested type mb1232
- list all supported types in {of,i2c}_device_id as well as in Kconfig
- reduce former status gpio to pure interrupt for announcement of finished
read cycle
Changes in v2:
Thanks to the review of Andreas and Peter there are a couple of changes:
- rename type wildcard mb12x2 to i2cxl in dt binding
- split changes in vendor list and dt doc into two patches
- merge driver source and Kconfig/Makefile change into one patch
- reword dt documentation
- use directly __be16 datatype to read directly from i2c
- use s16 as return value from mb12x2_read_distance()
Andreas Klinger (4):
dt-bindings: Add vendor prefix for MaxBotix
dt-bindings: maxbotix,mb1232: Add MaxBotix i2c ultrasonic rangers
mb1232.c: add distance iio sensor with i2c
MAINTAINERS: add maintainer for maxbotix ultrasonic driver
.../bindings/iio/proximity/maxbotix,mb1232.txt | 31 +++
.../devicetree/bindings/vendor-prefixes.txt | 1 +
MAINTAINERS | 7 +
drivers/iio/proximity/Kconfig | 12 +
drivers/iio/proximity/Makefile | 1 +
drivers/iio/proximity/mb1232.c | 274 +++++++++++++++++++++
6 files changed, 326 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/proximity/maxbotix,mb1232.txt
create mode 100644 drivers/iio/proximity/mb1232.c
--
2.11.0
