Add documentation for the devicetree bindings of the DRM driver for the
JZ47xx family of SoCs from Ingenic.
Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
Tested-by: Artur Rojek <contact@xxxxxxxxxxxxxx>
---
Notes:
v2: Remove ingenic,panel property.
.../devicetree/bindings/display/ingenic,drm.txt | 29 ++++++++++++++++++++++
1 file changed, 29 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/ingenic,drm.txt
diff --git a/Documentation/devicetree/bindings/display/ingenic,drm.txt b/Documentation/devicetree/bindings/display/ingenic,drm.txt
new file mode 100644
index 000000000000..f57a4ae0f7ac
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/ingenic,drm.txt
@@ -0,0 +1,29 @@
+Ingenic JZ47xx DRM driver
+
+Required properties:
+- compatible: one of:
+ * ingenic,jz4740-drm
+ * ingenic,jz4725b-drm
+- reg: LCD registers location and length
+- clocks: LCD pixclock and device clock specifiers.
+ The device clock is only required on the JZ4740.
+- clock-names: "lcd_pclk" and "lcd"
+- interrupts: Specifies the interrupt line the LCD controller is connected to.
+
+Optional properties:
+- ingenic,lcd-mode: LCD mode to use with the display panel.
+ See <dt-bindings/display/ingenic,drm.h> for all the
+ possible values.
+
+Example:
+
+lcd: lcd-controller@13050000 {
+ compatible = "ingenic,jz4725b-drm";
+ reg = <0x13050000 0x1000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <31>;
+
+ clocks = <&cgu JZ4725B_CLK_LCD>;
+ clock-names = "lcd";
+};
--
2.11.0
