ICN6211 is MIPI-DSI/RGB converter bridge from chipone.
It has a flexible configuration of MIPI DSI signal input
and produce RGB565, RGB666, RGB888 output format.
Add dt-bingings for it.
Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
---
.../display/bridge/chipone,icn6211.txt | 36 +++++++++++++++++++
1 file changed, 36 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/bridge/chipone,icn6211.txt
diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.txt b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.txt
new file mode 100644
index 000000000000..7f13efd7ee7f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.txt
@@ -0,0 +1,36 @@
+Chipone ICN6211 MIPI-DSI to RGB Convertor Bridge
+
+ICN6211 is MIPI-DSI/RGB converter bridge from chipone.
+It has a flexible configuration of MIPI DSI signal input
+and produce RGB565, RGB666, RGB888 output format.
+
+Required properties for RGB:
+- compatible: must be "chipone,icn6211" and one of:
+ * "bananapi,icn6211"
+- reg: the virtual channel number of a DSI peripheral
+- reset-gpios: a GPIO phandle for the reset pin
+
+The device node can contain following 'port' child nodes,
+according to the OF graph bindings defined in [1]:
+ 0: DSI Input, not required, if the bridge is DSI controlled
+ 1: RGB Output, mandatory
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+
+ bridge@0 {
+ compatible = "bananapi,icn6211", "chipone,icn6211";
+ reg = <0>;
+ reset-gpios = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD6 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+
+ bridge_out_ep: endpoint {
+ remote-endpoint = <&panel_ep>;
+ };
+ };
+ };
--
2.18.0.321.gffc6fa0e3
