[PATCH v4 6/6] dt-bindings: fpga: Add bindings for ZynqMP fpga driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add documentation to describe Xilinx ZynqMP fpga driver
bindings.

Signed-off-by: Nava kishore Manne <nava.manne@xxxxxxxxxx>
---
Changes for v4:
		-Modified binding description as suggested by Moritz Fischer.
Changes for v3:
                -Removed PCAP as a child node to the FW and Created
		 an independent node since PCAP driver is a consumer
		 not a provider.

 .../bindings/fpga/xlnx,zynqmp-pcap-fpga.txt           | 11 +++++++++++
 1 file changed, 11 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt

diff --git a/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt
new file mode 100644
index 000000000000..6d7f10775d9b
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt
@@ -0,0 +1,11 @@
+Devicetree bindings for Zynq Ultrascale MPSoC FPGA Manager.
+The ZynqMP SoC uses the PCAP (Processor configuration Port) to configure the
+Programmable Logic (PL). The configuration uses  the firmware interface.
+
+Required properties:
+- compatible: should contain "xlnx,zynqmp-pcap-fpga"
+
+Example:
+	zynqmp_pcap: pcap {
+		compatible = "xlnx,zynqmp-pcap-fpga";
+	};
-- 
2.18.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux