The Ben Nanonote from Qi Hardware expects a specific OOB layout on its NAND. Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx> --- Notes: v2: New patch v3: Use the qi,lb60 layout unconditionally if we detect that we're running on that board. v4: No change v5: No change drivers/mtd/nand/raw/ingenic/ingenic_nand.c | 41 ++++++++++++++++++++++++++++- 1 file changed, 40 insertions(+), 1 deletion(-) diff --git a/drivers/mtd/nand/raw/ingenic/ingenic_nand.c b/drivers/mtd/nand/raw/ingenic/ingenic_nand.c index a2450e10932a..d32d68ef0dc7 100644 --- a/drivers/mtd/nand/raw/ingenic/ingenic_nand.c +++ b/drivers/mtd/nand/raw/ingenic/ingenic_nand.c @@ -72,6 +72,41 @@ static inline struct ingenic_nfc *to_ingenic_nfc(struct nand_controller *ctrl) return container_of(ctrl, struct ingenic_nfc, controller); } +static int qi_lb60_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct nand_ecc_ctrl *ecc = &chip->ecc; + + if (section || !ecc->total) + return -ERANGE; + + oobregion->length = ecc->total; + oobregion->offset = 12; + + return 0; +} + +static int qi_lb60_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct nand_ecc_ctrl *ecc = &chip->ecc; + + if (section) + return -ERANGE; + + oobregion->length = mtd->oobsize - ecc->total - 12; + oobregion->offset = 12 + ecc->total; + + return 0; +} + +const struct mtd_ooblayout_ops qi_lb60_ooblayout_ops = { + .ecc = qi_lb60_ooblayout_ecc, + .free = qi_lb60_ooblayout_free, +}; + static int jz4725b_ooblayout_ecc(struct mtd_info *mtd, int section, struct mtd_oob_region *oobregion) { @@ -247,7 +282,11 @@ static int ingenic_nand_attach_chip(struct nand_chip *chip) return -EINVAL; } - mtd_set_ooblayout(mtd, nfc->soc_info->oob_layout); + /* For legacy reasons we use a different layout on the qi,lb60 board. */ + if (of_machine_is_compatible("qi,lb60")) + mtd_set_ooblayout(mtd, &qi_lb60_ooblayout_ops); + else + mtd_set_ooblayout(mtd, nfc->soc_info->oob_layout); return 0; } -- 2.11.0