RE: [PATCH v3 6/6] dt-bindings: fpga: Add bindings for ZynqMP fpga driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Ping !!

> -----Original Message-----
> From: Nava kishore Manne
> Sent: Tuesday, March 5, 2019 3:12 PM
> To: 'Rob Herring' <robh@xxxxxxxxxx>
> Cc: mark.rutland@xxxxxxx; Michal Simek <michals@xxxxxxxxxx>; Rajan Vaja
> <RAJANV@xxxxxxxxxx>; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux-
> kernel@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; Jolly Shah
> <JOLLYS@xxxxxxxxxx>; chinnikishore369@xxxxxxxxx; 'Alan Tull'
> <atull@xxxxxxxxxx>; Moritz Fischer <moritz.fischer@xxxxxxxxx>
> Subject: RE: [PATCH v3 6/6] dt-bindings: fpga: Add bindings for ZynqMP fpga
> driver
> 
> Hi Rob,
> 
> Thanks for the quick response.
> Please find my response inline.
> 
> > -----Original Message-----
> > From: Rob Herring [mailto:robh@xxxxxxxxxx]
> > Sent: Monday, March 4, 2019 10:57 PM
> > To: Nava kishore Manne <navam@xxxxxxxxxx>
> > Cc: mark.rutland@xxxxxxx; Michal Simek <michals@xxxxxxxxxx>; Rajan
> > Vaja <RAJANV@xxxxxxxxxx>; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux-
> > kernel@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; Jolly Shah
> > <JOLLYS@xxxxxxxxxx>; chinnikishore369@xxxxxxxxx
> > Subject: Re: [PATCH v3 6/6] dt-bindings: fpga: Add bindings for ZynqMP
> > fpga driver
> >
> > On Mon, Mar 4, 2019 at 5:35 AM Nava kishore Manne <navam@xxxxxxxxxx>
> > wrote:
> > >
> > > Hi Rob,
> > >
> > >  Thanks for providing the review comments..
> > > Please find my response inline.
> > >
> > > > -----Original Message-----
> > > > From: Rob Herring [mailto:robh@xxxxxxxxxx]
> > > > Sent: Saturday, February 23, 2019 2:01 AM
> > > > To: Nava kishore Manne <navam@xxxxxxxxxx>
> > > > Cc: mark.rutland@xxxxxxx; Michal Simek <michals@xxxxxxxxxx>; Rajan
> > > > Vaja <RAJANV@xxxxxxxxxx>; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> > > > linux- kernel@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; Jolly
> > > > Shah <JOLLYS@xxxxxxxxxx>; chinnikishore369@xxxxxxxxx
> > > > Subject: Re: [PATCH v3 6/6] dt-bindings: fpga: Add bindings for
> > > > ZynqMP fpga driver
> > > >
> > > > On Wed, Jan 23, 2019 at 2:46 PM Nava kishore Manne
> > > > <navam@xxxxxxxxxx>
> > > > wrote:
> > > > >
> > > > > Hi Rob,
> > > > >
> > > > >
> > > > >
> > > > > Thanks for providing the comments...
> > > >
> > > > Please fix your mailer to send plain text emails to mail lists.
> > > >
> > > Thanks for pointing it..
> > >
> > > >
> > > > > > -----Original Message-----
> > > > >
> > > > > > From: Rob Herring [mailto:robh@xxxxxxxxxx]
> > > > >
> > > > > > Sent: Monday, January 21, 2019 9:19 PM
> > > > >
> > > > > > To: Nava kishore Manne <navam@xxxxxxxxxx>
> > > > >
> > > > > > Cc: mark.rutland@xxxxxxx; Michal Simek <michals@xxxxxxxxxx>;
> > > > > > Rajan Vaja
> > > > >
> > > > > > <RAJANV@xxxxxxxxxx>; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> > > > > > linux-
> > > > >
> > > > > > kernel@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; Jolly Shah
> > > > >
> > > > > > <JOLLYS@xxxxxxxxxx>; chinnikishore369@xxxxxxxxx
> > > > >
> > > > > > Subject: Re: [PATCH v3 6/6] dt-bindings: fpga: Add bindings
> > > > > > for ZynqMP fpga
> > > > >
> > > > > > driver
> > > > >
> > > > > >
> > > > >
> > > > > > On Mon, Jan 21, 2019 at 11:08:35PM +0530, Nava kishore Manne
> wrote:
> > > > >
> > > > > > > Add documentation to describe Xilinx ZynqMP fpga driver bindings.
> > > > >
> > > > > > >
> > > > >
> > > > > > > Signed-off-by: Nava kishore Manne <nava.manne@xxxxxxxxxx>
> > > > >
> > > > > > > ---
> > > > >
> > > > > > > Changes for v3:
> > > > >
> > > > > > >                         -Removed PCAP as a child node to the
> > > > > > > FW and Created
> > > > >
> > > > > > >                         an independent node since PCAP
> > > > > > > driver is a consumer
> > > > >
> > > > > > >                         not a provider.
> > > > >
> > > > > > >
> > > > >
> > > > > > >  .../bindings/fpga/xlnx,zynqmp-pcap-fpga.txt         | 13
> +++++++++++++
> > > > >
> > > > > > >  1 file changed, 13 insertions(+)
> > > > >
> > > > > > >  create mode 100644
> > > > >
> > > > > > > Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga
> > > > > > > .t
> > > > > > > xt
> > > > >
> > > > > > >
> > > > >
> > > > > > > diff --git
> > > > >
> > > > > > > a/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fp
> > > > > > > ga
> > > > > > > .txt
> > > > >
> > > > > > > b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fp
> > > > > > > ga
> > > > > > > .txt
> > > > >
> > > > > > > new file mode 100644
> > > > >
> > > > > > > index 000000000000..1f6f58872311
> > > > >
> > > > > > > --- /dev/null
> > > > >
> > > > > > > +++ b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pca
> > > > > > > +++ p-
> > > > > > > +++ fpga
> > > > > > > +++ .txt
> > > > >
> > > > > > > @@ -0,0 +1,13 @@
> > > > >
> > > > > > > +Device Tree zynqmp-fpga bindings for the Zynq Ultrascale+
> > > > > > > +MPSoC
> > > > >
> > > > > > > +controlled using ZynqMP SoC firmware interface For
> > > > > > > +Bitstream
> > > > >
> > > > > > > +configuration on ZynqMp Soc uses processor configuration
> > > > >
> > > > > > > +port(PCAP) to configure the programmable logic(PL) through
> > > > > > > +PS by
> > > > >
> > > > > > > +using FW interface.
> > > > >
> > > > > > > +
> > > > >
> > > > > > > +Required properties:
> > > > >
> > > > > > > +- compatible: should contain "xlnx,zynqmp-pcap-fpga"
> > > > >
> > > > > > > +
> > > > >
> > > > > > > +Example:
> > > > >
> > > > > > > +      zynqmp_pcap: pcap {
> > > > >
> > > > > > > +                     compatible = "xlnx,zynqmp-pcap-fpga";
> > > > >
> > > > > > > +      };
> > > > >
> > > > > >
> > > > >
> > > > > > There's no need for a DT node. Just make the firware driver
> > > > > > create a platform
> > > > >
> > > > > > device for pcap.
> > > > >
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > > This driver being used by the FPGA manager
> > > > > framework(fpga-region) to apply
> > > > overlay's so this node is needed AFAIK.
> > > >
> > > > The binding says nothing about child nodes and what they are.
> > > > Please define that.
> > > >
> > > Do you mean I need to add the example usage of the pcap node like as
> > > below
> > in the binding doc?
> >
> > You can have an example, but no, I meant you need say something like
> > "The pcap node may have 1 or more child nodes which have an 'fpga-region'
> > compatible.
> > >
> > > Device Tree Example for Full Reconfiguration
> > > ============================================
> > >
> > > Live Device Tree contains:
> > >
> > >         zynqmp_pcap: pcap {
> > >                 compatible = "xlnx,zynqmp-pcap-fpga";
> > >         };
> > >
> > >         fpga_region0: fpga-region0 {
> >
> > This should be a child of pcap.
> >
> AFAIK we can't put the fpga-region as a child of pcap as both are independent
> and they refered to each other using phandlers I have made this changes by
> looking into the below reference doc.
> https://github.com/torvalds/linux/blob/master/Documentation/devicetree/bind
> ings/fpga/fpga-region.txt
> 
> > >                 compatible = "fpga-region";
> > >                 fpga-mgr = <&zynqmp_pcap>;
> > >                 #address-cells = <0x1>;
> > >                 #size-cells = <0x1>;
> > >                 ranges;
> > >         };
> > >
> > > DT Overlay contains:
> >
> > Don't show overlays in examples. Just show a final tree (i.e. base
> > with overlay applied).
> 
> To get a better picture for the users i have added this example node with
> overlays I feel it's good to have this info because it will not impact the
> functionality of PCAP node.
> Please let me know if you still  want me to make this example without overlay
> node.
> 
> Regards,
> Navakishore.




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux