Add documentation to describe Xilinx ZynqMP fpga driver
bindings.
Signed-off-by: Nava kishore Manne <nava.manne@xxxxxxxxxx>
---
Changes for v3:
-Removed PCAP as a child node to the FW and Created
an independent node since PCAP driver is a consumer
not a provider.
.../bindings/fpga/xlnx,zynqmp-pcap-fpga.txt | 13 +++++++++++++
1 file changed, 13 insertions(+)
create mode 100644 Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt
diff --git a/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt
new file mode 100644
index 000000000000..1f6f58872311
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt
@@ -0,0 +1,13 @@
+Device Tree zynqmp-fpga bindings for the Zynq Ultrascale+ MPSoC controlled
+using ZynqMP SoC firmware interface
+For Bitstream configuration on ZynqMp Soc uses processor configuration
+port(PCAP) to configure the programmable logic(PL) through PS by using
+FW interface.
+
+Required properties:
+- compatible: should contain "xlnx,zynqmp-pcap-fpga"
+
+Example:
+ zynqmp_pcap: pcap {
+ compatible = "xlnx,zynqmp-pcap-fpga";
+ };
--
2.18.0
