On Wed, Feb 27, 2019 at 11:54:23PM +0200, Jyri Sarha wrote:
> Implement HDMI audio support by using ASoC HDMI codec. The commit
> implements the necessary callbacks and configuration for the HDMI
> codec and registers a virtual platform device for the codec to attach.
>
> Signed-off-by: Jyri Sarha <jsarha@xxxxxx>
> ---
> .../bindings/display/bridge/sii902x.txt | 36 +-
> drivers/gpu/drm/bridge/sii902x.c | 453 +++++++++++++++++-
> include/dt-bindings/sound/sii902x-audio.h | 11 +
Please split bindings (doc and header) to a separate patch.
> 3 files changed, 493 insertions(+), 7 deletions(-)
> create mode 100644 include/dt-bindings/sound/sii902x-audio.h
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/sii902x.txt b/Documentation/devicetree/bindings/display/bridge/sii902x.txt
> index 72d2dc6c3e6b..647b2fd84db9 100644
> --- a/Documentation/devicetree/bindings/display/bridge/sii902x.txt
> +++ b/Documentation/devicetree/bindings/display/bridge/sii902x.txt
> @@ -5,9 +5,32 @@ Required properties:
> - reg: i2c address of the bridge
>
> Optional properties:
> - - interrupts: describe the interrupt line used to inform the host
> + - interrupts: describe the interrupt line used to inform the host
Unrelated change.
> about hotplug events.
> - reset-gpios: OF device-tree gpio specification for RST_N pin.
> + - i2s-fifo-routing: Array of exactly 4 integers indicating i2s
Needs a vendor prefix.
> + pins for audio fifo routing. First integer defines routing to
> + fifo 0 and second to fifo 1, etc. Integers can be filled with
> + definitions from: include/dt-bindings/sound/sii902x-audio.h
> + The available definitions are:
> + - ENABLE_BIT: enable this audio fifo
> + - CONNECT_SD#: route audio input from SD0, SD1, SD2, or SD3 i2s
> + data input pin
> + - LEFT_RIGHT_SWAP_BIT: swap i2s input channels for this fifo
> + I2S HDMI audio is configured only if this property is found.
> + - clocks: phandle mclk
> + - clock-names: "mclk"
> + Describes SII902x MCLK input. MCLK is used to produce
> + HDMI audio CTS values. This property is required if
> + "i2s-fifo-routing"-property is present. This property follows
> + Documentation/devicetree/bindings/clock/clock-bindings.txt
> + consumer binding.
> + - #sound-dai-cells = <0>: ASoC codec dai available for simple-card
> + If audio properties are present sii902x provides an ASoC
> + codec component driver that can be used by other ASoC
> + components like simple-card. See binding document fo> + details:
> + Documentation/devicetree/bindings/sound/simple-card.txt
>
> Optional subnodes:
> - video input: this subnode can contain a video input port node
> @@ -21,6 +44,17 @@ Example:
> compatible = "sil,sii9022";
> reg = <0x39>;
> reset-gpios = <&pioA 1 0>;
> +
> + #sound-dai-cells = <0>;
> + i2s-fifo-routing = <
> + (ENABLE_BIT|CONNECT_SD0)
> + 0
> + 0
> + 0
> + >;
> + clocks = <&mclk>;
> + clock-names = "mclk";
> +
> ports {
> #address-cells = <1>;
> #size-cells = <0>;
[...]
> diff --git a/include/dt-bindings/sound/sii902x-audio.h b/include/dt-bindings/sound/sii902x-audio.h
> new file mode 100644
> index 000000000000..32e50a926b6f
> --- /dev/null
> +++ b/include/dt-bindings/sound/sii902x-audio.h
> @@ -0,0 +1,11 @@
License?
> +#ifndef __DT_SII9022_AUDIO_H
> +#define __DT_SII9022_AUDIO_H
> +
> +#define ENABLE_BIT 0x80
> +#define CONNECT_SD0 0x00
> +#define CONNECT_SD1 0x10
> +#define CONNECT_SD2 0x20
> +#define CONNECT_SD3 0x30
> +#define LEFT_RIGHT_SWAP_BIT 0x04
> +
> +#endif /* __DT_SII9022_AUDIO_H */
> --
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
>
