Changes since first version:
- Moved reviewed patches to front:
- drm/bridge: sii902x: add input_bus_flags
- drm/bridge: sii902x: Set output mode to HDMI or DVI according to EDID
- drm/bridge: sii902x: pixel clock unit is 10kHz instead of 1kHz
- Added a new fix:
- drm/bridge: sii902x: Select I2C_MUX
- Applied some review suggestions to
- drm/bridge: sii902x: Implement HDMI audio support
- use clock-names property to name mclk
- move comment describing added mutex to struct sii902x and improve it
- cleanup sii902x_mute()
- cleanup sii902x_select_mclk_div()
- fix condition for checking ENABLE_BIT from i2s_fifo_routing in
sii902x_audio_codec_init()
Still to do
- Agree on i2s wires to HDMI audio fifo routing in dts.
The current scheme is quite straight forward, but there is maybe
there is even more straight forward solutions like:
audio-fifo-enable = <1 1 1 1>;
audio-i2s-pin-to-fifo = <0 1 2 3>;
Meaning that all fifos are enabled and SD0 is routed to fifo 0, SD1
to fifo 1, etc. I am not sure if the channel swap functionality
should show in dts binding.
Jyri Sarha (4):
drm/bridge: sii902x: Set output mode to HDMI or DVI according to EDID
drm/bridge: sii902x: pixel clock unit is 10kHz instead of 1kHz
drm/bridge: sii902x: Select I2C_MUX
drm/bridge: sii902x: Implement HDMI audio support
Tomi Valkeinen (1):
drm/bridge: sii902x: add input_bus_flags
.../bindings/display/bridge/sii902x.txt | 36 +-
drivers/gpu/drm/bridge/Kconfig | 1 +
drivers/gpu/drm/bridge/sii902x.c | 472 +++++++++++++++++-
include/dt-bindings/sound/sii902x-audio.h | 11 +
4 files changed, 512 insertions(+), 8 deletions(-)
create mode 100644 include/dt-bindings/sound/sii902x-audio.h
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
