On 05/03/2019 23:02, Martin Blumenstingl wrote:
> On Mon, Mar 4, 2019 at 11:49 AM Neil Armstrong <narmstrong@xxxxxxxxxxxx> wrote:
>>
>> The G12A Documentation lacked these 2 reset lines, but they are present and
>> used for each USB 2 PHYs.
>>
>> Add them to the dt-bindings for the upcoming USB support.
>>
>> Fixes: dbfc54534dfc ("dt-bindings: reset: meson: add g12a bindings")
>> Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
>
>> ---
>> include/dt-bindings/reset/amlogic,meson-g12a-reset.h | 5 ++++-
>> 1 file changed, 4 insertions(+), 1 deletion(-)
>>
>> diff --git a/include/dt-bindings/reset/amlogic,meson-g12a-reset.h b/include/dt-bindings/reset/amlogic,meson-g12a-reset.h
>> index 8063e8314eef..6d487c5eba2c 100644
>> --- a/include/dt-bindings/reset/amlogic,meson-g12a-reset.h
>> +++ b/include/dt-bindings/reset/amlogic,meson-g12a-reset.h
>> @@ -51,7 +51,10 @@
>> #define RESET_SD_EMMC_A 44
>> #define RESET_SD_EMMC_B 45
>> #define RESET_SD_EMMC_C 46
>> -/* 47-60 */
>> +/* 47 */
>> +#define RESET_USB_PHY20 48
>> +#define RESET_USB_PHY21 49
> because it's always hard to look up, here's the reference to that
> information Amlogic's buildroot kernel
> (buildroot_openlinux_kernel_4.9_fbdev_20180706):
> kernel/aml-4.9/drivers/amlogic/usb/phy/phy-aml-new-usb2-v2.c uses:
> writel((val | (0x3 << 16)), (void __iomem *) ((unsigned
> long)phy->reset_regs + (0x21 * 4 - 0x8)));
>
> this translates to:
> - (0x21 * 4 - 0x8) = RESET1 register / reset line ID 32 and above
> (reset line 0 is at "0x20 * 4 - 0x08")
> - bits 16 and 17 = add 32 to that gives us reset IDs 48 and 49
Exactly, thanks for pointing this !
Neil
>
>
> Regards
> Martin
>
