Add & enable stm32 factory-programmed memory. Describe temperature sensor
calibration cells. Non-volatile calibration data is made available by
stm32mp157c bootrom in bsec_dataX registers.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
---
arch/arm/boot/dts/stm32mp157c.dtsi | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
index 8bf1c17..9a7ac80 100644
--- a/arch/arm/boot/dts/stm32mp157c.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c.dtsi
@@ -1106,6 +1106,19 @@
status = "disabled";
};
+ bsec: nvmem@5c005000 {
+ compatible = "st,stm32mp15-bsec";
+ reg = <0x5c005000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ts_cal1: calib@5c {
+ reg = <0x5c 0x2>;
+ };
+ ts_cal2: calib@5e {
+ reg = <0x5e 0x2>;
+ };
+ };
+
i2c6: i2c@5c009000 {
compatible = "st,stm32f7-i2c";
reg = <0x5c009000 0x400>;
--
2.7.4
