[PATCH v2 2/2] dt-bindings: net: can: binding for CTU CAN FD open-source IP core.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Pavel Pisa <pisa@xxxxxxxxxxxxxxxx>

Signed-off-by: Pavel Pisa <pisa@xxxxxxxxxxxxxxxx>
---
 .../devicetree/bindings/net/can/ctu,ctucanfd.txt   | 108 +++++++++++++++++++++
 1 file changed, 108 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/can/ctu,ctucanfd.txt

diff --git a/Documentation/devicetree/bindings/net/can/ctu,ctucanfd.txt b/Documentation/devicetree/bindings/net/can/ctu,ctucanfd.txt
new file mode 100644
index 000000000000..fea9c08b79ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/ctu,ctucanfd.txt
@@ -0,0 +1,108 @@
+Memory mapped CTU CAN FD open-source IP core
+
+The core sources and documentation on project page
+
+  https://gitlab.fel.cvut.cz/canbus/ctucanfd_ip_core
+  http://canbus.pages.fel.cvut.cz/ctucanfd_ip_core/Progdokum.pdf
+
+Integration in Xilinx Zynq SoC based system together with
+OpenCores SJA1000 compatible controllers
+
+  https://gitlab.fel.cvut.cz/canbus/zynq/zynq-can-sja1000-top
+
+Martin Jerabek's dimploma thesis with integration and testing
+framework description
+
+ https://dspace.cvut.cz/bitstream/handle/10467/80366/F3-DP-2019-Jerabek-Martin-Jerabek-thesis-2019-canfd.pdf
+
+Required properties:
+
+- compatible : should be one of "ctu,ctucanfd", "ctu,canfd-2".
+      The "canfd-2" has been reserved for older revision of the IP core.
+      The revision can be read from the IP core register as well.
+
+- reg = <(baseaddr) (size)> : specify mapping into physical address
+      space of the processor system.
+
+- interrupts : property with a value describing the interrupt source
+      required for the CTU CAN FD. For Zynq SoC system format is
+      <(is_spi) (number) (type)> where is_spi defines if it is SPI
+      (shared peripheral) interrupt, the second number is translated
+      to the vector by addition of 32 on Zynq-7000 systems and type
+      is IRQ_TYPE_LEVEL_HIGH (4) for Zynq.
+
+- interrupt-parent = <&interrupt-controller-phandle> :
+      is required for Zynq SoC to find map interrupt
+      to the correct controller
+
+- clocks: phandle of reference clock (100 MHz is appropriate
+      for FPGA implementation on Zynq-7000 system).
+
+Optional properties:
+
+- clock-names: not used in actual design but if more clocks are used
+      by cores then "can_clk" would be clock source name for the clocks
+      used to define CAN time-quanta.
+
+Example when integrated to Zynq-7000 system DTS:
+
+        / {
+            /* ... */
+            amba: amba {
+                #address-cells = <1>;
+                #size-cells = <1>;
+                compatible = "simple-bus";
+
+                ctu_can_fd_0: ctu_can_fd@43c30000 {
+                    compatible = "ctu,ctucanfd";
+                    interrupt-parent = <&intc>;
+                    interrupts = <0 30 4>;
+                    clocks = <&clkc 15>;
+                    reg = <0x43c30000 0x10000>;
+                };
+            };
+        };
+
+
+Example when used as DTS overlay on Zynq-7000 system:
+
+
+// Device Tree Example: Full Reconfiguration without Bridges
+/dts-v1/;
+/plugin/;
+
+/ {
+    fragment@0 {
+        target-path = "/fpga-full";
+
+        __overlay__ {
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            firmware-name = "system.bit.bin";
+        };
+    };
+
+    fragment@1 {
+        target-path = "/amba";
+        __overlay__ {
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            ctu_can_fd_0: ctu_can_fd@43c30000 {
+                compatible = "ctu,ctucanfd";
+                interrupt-parent = <&intc>;
+                interrupts = <0 30 4>;
+                clocks = <&clkc 15>;
+                reg = <0x43c30000 0x10000>;
+            };
+            ctu_can_fd_1: ctu_can_fd@43c70000 {
+                compatible = "ctu,ctucanfd";
+                interrupt-parent = <&intc>;
+                interrupts = <0 31 4>;
+                clocks = <&clkc 15>;
+                reg = <0x43c70000 0x10000>;
+            };
+        };
+    };
+};
-- 
2.11.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux