RE: [PATCH v4 2/6] usb:common Separated decoding functions from dwc3 driver.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

>On Thu, Feb 14, 2019 at 07:45:10PM +0000, Pawel Laszczak wrote:
>> Patch moves some decoding functions from driver/usb/dwc3/debug.h driver
>> to driver/usb/common/debug.c file. These moved functions include:
>>     dwc3_decode_get_status
>>     dwc3_decode_set_clear_feature
>>     dwc3_decode_set_address
>>     dwc3_decode_get_set_descriptor
>>     dwc3_decode_get_configuration
>>     dwc3_decode_set_configuration
>>     dwc3_decode_get_intf
>>     dwc3_decode_set_intf
>>     dwc3_decode_synch_frame
>>     dwc3_decode_set_sel
>>     dwc3_decode_set_isoch_delay
>>     dwc3_decode_ctrl
>>
>> These functions are used also in inroduced cdns3 driver.
>>
>> All functions prefixes were changed from dwc3 to usb.
>> Also, function's parameters has been extended according to the name
>> of fields in standard SETUP packet.
>> Additionally, patch adds usb_decode_ctrl function to
>> include/linux/usb/ch9.h file.
>>
>> Signed-off-by: Pawel Laszczak <pawell@xxxxxxxxxxx>
>> ---
>>  drivers/usb/common/Makefile |   2 +-
>>  drivers/usb/common/debug.c  | 270 ++++++++++++++++++++++++++++++++++++
>>  drivers/usb/dwc3/debug.h    | 249 ---------------------------------
>>  drivers/usb/dwc3/trace.h    |   2 +-
>>  include/linux/usb/ch9.h     |  25 ++++
>>  5 files changed, 297 insertions(+), 251 deletions(-)
>>  create mode 100644 drivers/usb/common/debug.c
>>
>> diff --git a/drivers/usb/common/Makefile b/drivers/usb/common/Makefile
>> index fb4d5ef4165c..3d3d2962ea4b 100644
>> --- a/drivers/usb/common/Makefile
>> +++ b/drivers/usb/common/Makefile
>> @@ -4,7 +4,7 @@
>>  #
>>
>>  obj-$(CONFIG_USB_COMMON)	  += usb-common.o
>> -usb-common-y			  += common.o
>> +usb-common-y			  += common.o debug.o
>
>It's nice to have these in a common place, but you just bloated all of
>the USB-enabled systems in the world for the use of 2 odd-ball system
>controllers that almost no one has :)
>
>So, any way to only pull in this file if you actually need these
>functions?
>
Yes, I'm using these functions a lot for debugging. It's only way to check what driver does.
We are also going to upstreaming 3.1 controller so there will be a third driver using them :). 
  
I'm not sure If anyone will use them on host side, so we can consider whether they should be
in usb/common directory. Maybe usb/gadget will be better place. 

Felipe, do you have any comments in this topic?   

Thanks 
Pawel





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux