On 2/13/19 5:37 AM, Matti Vaittinen wrote:
Initial support for watchdog block included in ROHM BD70528
power management IC.
Configurations for low power states are still to be checked.
Signed-off-by: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
Acked-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---
I maintained the ack from Guenter as only change is to use function
exported by MFD instead of pointer to function provided by MFD. Please
let me know if this is not Ok.
NP. With functions exported by MFD, my choice would have been to handle
locking there as well with respective locking/unlocking functions exported.
But that is your call to make, not mine.
Guenter
drivers/watchdog/Kconfig | 12 +++
drivers/watchdog/Makefile | 1 +
drivers/watchdog/bd70528_wdt.c | 190 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 203 insertions(+)
create mode 100644 drivers/watchdog/bd70528_wdt.c
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 57f017d74a97..f30e3a3e886e 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -90,6 +90,18 @@ config SOFT_WATCHDOG_PRETIMEOUT
watchdog. Be aware that governors might affect the watchdog because it
is purely software, e.g. the panic governor will stall it!
+config BD70528_WATCHDOG
+ tristate "ROHM BD70528 PMIC Watchdog"
+ depends on MFD_ROHM_BD70528
+ select WATCHDOG_CORE
+ help
+ Support for the watchdog in the ROHM BD70528 PMIC. Watchdog trigger
+ cause system reset.
+
+ Say Y here to include support for the ROHM BD70528 watchdog.
+ Alternatively say M to compile the driver as a module,
+ which will be called bd70528_wdt.
+
config DA9052_WATCHDOG
tristate "Dialog DA9052 Watchdog"
depends on PMIC_DA9052 || COMPILE_TEST
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index a0917ef28e07..1ce87a3b1172 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -204,6 +204,7 @@ obj-$(CONFIG_WATCHDOG_SUN4V) += sun4v_wdt.o
obj-$(CONFIG_XEN_WDT) += xen_wdt.o
# Architecture Independent
+obj-$(CONFIG_BD70528_WATCHDOG) += bd70528_wdt.o
obj-$(CONFIG_DA9052_WATCHDOG) += da9052_wdt.o
obj-$(CONFIG_DA9055_WATCHDOG) += da9055_wdt.o
obj-$(CONFIG_DA9062_WATCHDOG) += da9062_wdt.o
diff --git a/drivers/watchdog/bd70528_wdt.c b/drivers/watchdog/bd70528_wdt.c
new file mode 100644
index 000000000000..5921be93c1ba
--- /dev/null
+++ b/drivers/watchdog/bd70528_wdt.c
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2018 ROHM Semiconductors
+// ROHM BD70528MWV watchdog driver
+
+#include <linux/bcd.h>
+#include <linux/kernel.h>
+#include <linux/mfd/rohm-bd70528.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/watchdog.h>
+
+/*
+ * Max time we can set is 1 hour, 59 minutes and 59 seconds
+ * and Minimum time is 1 second
+ */
+#define WDT_MAX_MS ((2 * 60 * 60 - 1) * 1000)
+#define WDT_MIN_MS 1000
+#define DEFAULT_TIMEOUT 60
+
+struct wdtbd70528 {
+ struct device *dev;
+ struct regmap *regmap;
+ struct mutex *rtc_lock;
+ struct watchdog_device wdt;
+};
+
+static int bd70528_wdt_set_locked(struct wdtbd70528 *w, int enable)
+{
+ struct bd70528 *bd70528;
+
+ bd70528 = container_of(w->rtc_lock, struct bd70528, rtc_timer_lock);
+ return bd70528_wdt_set(bd70528, enable, NULL);
+}
+
+static int bd70528_wdt_change(struct wdtbd70528 *w, int enable)
+{
+ int ret;
+
+ mutex_lock(w->rtc_lock);
+ ret = bd70528_wdt_set_locked(w, enable);
+ mutex_unlock(w->rtc_lock);
+
+ return ret;
+}
+
+static int bd70528_wdt_start(struct watchdog_device *wdt)
+{
+ struct wdtbd70528 *w = watchdog_get_drvdata(wdt);
+
+ dev_dbg(w->dev, "WDT ping...\n");
+ return bd70528_wdt_change(w, 1);
+}
+
+static int bd70528_wdt_stop(struct watchdog_device *wdt)
+{
+ struct wdtbd70528 *w = watchdog_get_drvdata(wdt);
+
+ dev_dbg(w->dev, "WDT stopping...\n");
+ return bd70528_wdt_change(w, 0);
+}
+
+static int bd70528_wdt_set_timeout(struct watchdog_device *wdt,
+ unsigned int timeout)
+{
+ unsigned int hours;
+ unsigned int minutes;
+ unsigned int seconds;
+ int ret;
+ struct wdtbd70528 *w = watchdog_get_drvdata(wdt);
+
+ seconds = timeout;
+ hours = timeout / (60 * 60);
+ /* Maximum timeout is 1h 59m 59s => hours is 1 or 0 */
+ if (hours)
+ seconds -= (60 * 60);
+ minutes = seconds / 60;
+ seconds = seconds % 60;
+
+ mutex_lock(w->rtc_lock);
+
+ ret = bd70528_wdt_set_locked(w, 0);
+ if (ret)
+ goto out_unlock;
+
+ ret = regmap_update_bits(w->regmap, BD70528_REG_WDT_HOUR,
+ BD70528_MASK_WDT_HOUR, hours);
+ if (ret) {
+ dev_err(w->dev, "Failed to set WDT hours\n");
+ goto out_en_unlock;
+ }
+ ret = regmap_update_bits(w->regmap, BD70528_REG_WDT_MINUTE,
+ BD70528_MASK_WDT_MINUTE, bin2bcd(minutes));
+ if (ret) {
+ dev_err(w->dev, "Failed to set WDT minutes\n");
+ goto out_en_unlock;
+ }
+ ret = regmap_update_bits(w->regmap, BD70528_REG_WDT_SEC,
+ BD70528_MASK_WDT_SEC, bin2bcd(seconds));
+ if (ret)
+ dev_err(w->dev, "Failed to set WDT seconds\n");
+ else
+ dev_dbg(w->dev, "WDT tmo set to %u\n", timeout);
+
+out_en_unlock:
+ ret = bd70528_wdt_set_locked(w, 1);
+out_unlock:
+ mutex_unlock(w->rtc_lock);
+
+ return ret;
+}
+
+static const struct watchdog_info bd70528_wdt_info = {
+ .identity = "bd70528-wdt",
+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+};
+
+static const struct watchdog_ops bd70528_wdt_ops = {
+ .start = bd70528_wdt_start,
+ .stop = bd70528_wdt_stop,
+ .set_timeout = bd70528_wdt_set_timeout,
+};
+
+static int bd70528_wdt_probe(struct platform_device *pdev)
+{
+ struct bd70528 *bd70528;
+ struct wdtbd70528 *w;
+ int ret;
+ unsigned int reg;
+
+ bd70528 = dev_get_drvdata(pdev->dev.parent);
+ if (!bd70528) {
+ dev_err(&pdev->dev, "No MFD driver data\n");
+ return -EINVAL;
+ }
+ w = devm_kzalloc(&pdev->dev, sizeof(*w), GFP_KERNEL);
+ if (!w)
+ return -ENOMEM;
+
+ w->regmap = bd70528->chip.regmap;
+ w->rtc_lock = &bd70528->rtc_timer_lock;
+ w->dev = &pdev->dev;
+
+ w->wdt.info = &bd70528_wdt_info;
+ w->wdt.ops = &bd70528_wdt_ops;
+ w->wdt.min_hw_heartbeat_ms = WDT_MIN_MS;
+ w->wdt.max_hw_heartbeat_ms = WDT_MAX_MS;
+ w->wdt.parent = pdev->dev.parent;
+ w->wdt.timeout = DEFAULT_TIMEOUT;
+ watchdog_set_drvdata(&w->wdt, w);
+ watchdog_init_timeout(&w->wdt, 0, pdev->dev.parent);
+
+ ret = bd70528_wdt_set_timeout(&w->wdt, w->wdt.timeout);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to set the watchdog timeout\n");
+ return ret;
+ }
+
+ mutex_lock(w->rtc_lock);
+ ret = regmap_read(w->regmap, BD70528_REG_WDT_CTRL, ®);
+ mutex_unlock(w->rtc_lock);
+
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to get the watchdog state\n");
+ return ret;
+ }
+ if (reg & BD70528_MASK_WDT_EN) {
+ dev_dbg(&pdev->dev, "watchdog was running during probe\n");
+ set_bit(WDOG_HW_RUNNING, &w->wdt.status);
+ }
+
+ ret = devm_watchdog_register_device(&pdev->dev, &w->wdt);
+ if (ret < 0)
+ dev_err(&pdev->dev, "watchdog registration failed: %d\n", ret);
+
+ return ret;
+}
+static struct platform_driver bd70528_wdt = {
+ .driver = {
+ .name = "bd70528-wdt"
+ },
+ .probe = bd70528_wdt_probe,
+};
+
+module_platform_driver(bd70528_wdt);
+
+MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("BD70528 watchdog driver");
+MODULE_LICENSE("GPL");
