Gental ping...
Best Regards!
Anson Huang
> -----Original Message-----
> From: Anson Huang
> Sent: 2019年2月7日 17:53
> To: robh+dt@xxxxxxxxxx; mark.rutland@xxxxxxx; shawnguo@xxxxxxxxxx;
> s.hauer@xxxxxxxxxxxxxx; kernel@xxxxxxxxxxxxxx; festevam@xxxxxxxxx;
> catalin.marinas@xxxxxxx; will.deacon@xxxxxxx; rui.zhang@xxxxxxxxx;
> edubezval@xxxxxxxxx; daniel.lezcano@xxxxxxxxxx; Aisheng Dong
> <aisheng.dong@xxxxxxx>; ulf.hansson@xxxxxxxxxx; Daniel Baluta
> <daniel.baluta@xxxxxxx>; horms+renesas@xxxxxxxxxxxx; Andy Gross
> <andy.gross@xxxxxxxxxx>; heiko@xxxxxxxxx; arnd@xxxxxxxx;
> maxime.ripard@xxxxxxxxxxx; jagan@xxxxxxxxxxxxxxxxxxxx;
> bjorn.andersson@xxxxxxxxxx; enric.balletbo@xxxxxxxxxxxxx;
> marc.w.gonzalez@xxxxxxx; olof@xxxxxxxxx; devicetree@xxxxxxxxxxxxxxx;
> linux-kernel@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux-
> pm@xxxxxxxxxxxxxxx
> Cc: dl-linux-imx <linux-imx@xxxxxxx>
> Subject: [PATCH V6 1/4] dt-bindings: fsl: scu: add thermal binding
>
> NXP i.MX8QXP is an ARMv8 SoC with a Cortex-M4 core inside as system
> controller, the system controller is in charge of system power, clock and
> thermal sensors etc. management, Linux kernel has to communicate with
> system controller via MU (message unit) IPC to get temperature from thermal
> sensors, this patch adds binding doc for i.MX system controller thermal
> driver.
>
> Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
> Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
> ---
> ChangeLog since V5:
> - add "imx,sensor-resource-id" in each thermal zone to pass resource
> ID for thermal driver.
> ---
> .../devicetree/bindings/arm/freescale/fsl,scu.txt | 20
> ++++++++++++++++++++
> 1 file changed, 20 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> index 72d481c..4b79751 100644
> --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> @@ -122,6 +122,20 @@ RTC bindings based on SCU Message Protocol
> Required properties:
> - compatible: should be "fsl,imx8qxp-sc-rtc";
>
> +Thermal bindings based on SCU Message Protocol
> +------------------------------------------------------------
> +
> +Required properties:
> +- compatible : Must be "fsl,imx8qxp-sc-thermal";
> +- tsens-num : Total number of thermal sensors supported;
> +- #thermal-sensor-cells : Should be 1. See
> +
> Documentation/devicetree/bindings/thermal/thermal.txt
> + for a description.
> +- imx,sensor-resource-id : This property should be defined in each thermal
> zone
> + of thermal-zones node, it passes each thermal
> zone's
> + resource id for thermal driver to get temperature
> via
> + SCU IPC.
> +
> Example (imx8qxp):
> -------------
> lsio_mu1: mailbox@5d1c0000 {
> @@ -168,6 +182,12 @@ firmware {
> rtc: rtc {
> compatible = "fsl,imx8qxp-sc-rtc";
> };
> +
> + tsens: thermal-sensor {
> + compatible = "fsl,imx8qxp-sc-thermal";
> + tsens-num = <1>;
> + #thermal-sensor-cells = <1>;
> + };
> };
> };
>
> --
> 2.7.4
