Hi, Here is the series of patches the initial support for SC2000(M10V) of Milbeaut SoCs. "M10V" is the internal name of SC2000, so commonly used in source code. SC2000 is a SoC of the Milbeaut series. equipped with a DSP optimized for computer vision. It also features advanced functionalities such as 360-degree, real-time spherical stitching with multi cameras, image stabilization for without mechanical gimbals, and rolling shutter correction. More detail is below: https://www.socionext.com/en/products/assp/milbeaut/SC2000.html Specifications for developers are below: - Quad-core 32bit Cortex-A7 on ARMv7-A architecture - NEON support - DSP - GPU - MAX 3GB DDR3 - Cortex-M0 for power control - NAND Flash Interface - SD UHS-I - SD UHS-II - SDIO - USB2.0 HOST / Device - USB3.0 HOST / Device - PCI express Gen2 - Ethernet Engine - I2C - UART - SPI - PWM Support is quite minimal for now, since it only includes timer, clock, pictrl and serial controller drivers, so we can only boot to userspace through initramfs. Support for the other peripherals will come eventually. Changes since v1: * Change file names. * Change #define names. * Refine cpu-enable-method and bindigs. * Add documentation for Milbeaut SoCs. * Add more infomation for timer driver. * Add sched_clock to timer driver. * Refine whole of clk driver. * Add earlycon instead of earlyprintk. * Refine Device Tree. Sugaya Taichi (15): dt-bindings: sram: milbeaut: Add binding for Milbeaut smp-sram dt-bindings: arm: Add SMP enable-method for Milbeaut dt-bindings: Add documentation for Milbeaut SoCs ARM: milbeaut: Add basic support for Milbeaut m10v SoC dt-bindings: timer: Add Milbeaut M10V timer description clocksource/drivers/timer-milbeaut: Introduce timer for Milbeaut SoCs ndings: clock: milbeaut: add Milbeaut clock description clock: milbeaut: Add Milbeaut M10V clock controller dt-bindings: serial: Add Milbeaut serial driver description serial: Add Milbeaut serial control dt-bindings: pinctrl: milbeaut: Add Milbeaut M10V pinctrl description pinctrl: milbeaut: Add Milbeaut M10V pinctrl ARM: dts: milbeaut: Add device tree set for the Milbeaut M10V board ARM: configs: Add Milbeaut M10V defconfig MAINTAINERS: Add entry to MAINTAINERS for Milbeaut Documentation/devicetree/bindings/arm/cpus.yaml | 1 + Documentation/devicetree/bindings/arm/milbeaut.txt | 6 + .../devicetree/bindings/clock/milbeaut-clock.txt | 49 ++ .../pinctrl/socionext,milbeaut-pinctrl.txt | 35 + .../devicetree/bindings/serial/milbeaut-uart.txt | 21 + .../devicetree/bindings/sram/milbeaut-smp-sram.txt | 24 + .../bindings/timer/socionext,milbeaut-timer.txt | 17 + MAINTAINERS | 9 + arch/arm/Kconfig | 2 + arch/arm/Makefile | 1 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/milbeaut-m10v-evb.dts | 32 + arch/arm/boot/dts/milbeaut-m10v.dtsi | 131 ++++ arch/arm/configs/milbeaut_m10v_defconfig | 366 ++++++++++ arch/arm/mach-milbeaut/Kconfig | 20 + arch/arm/mach-milbeaut/Makefile | 1 + arch/arm/mach-milbeaut/platsmp.c | 144 ++++ drivers/clk/Makefile | 1 + drivers/clk/clk-milbeaut.c | 626 +++++++++++++++++ drivers/clocksource/Kconfig | 9 + drivers/clocksource/Makefile | 1 + drivers/clocksource/timer-milbeaut.c | 161 +++++ drivers/pinctrl/Kconfig | 9 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-milbeaut.c | 759 +++++++++++++++++++++ drivers/tty/serial/Kconfig | 25 + drivers/tty/serial/Makefile | 1 + drivers/tty/serial/milbeaut_usio.c | 621 +++++++++++++++++ include/uapi/linux/serial_core.h | 3 + 29 files changed, 3077 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/milbeaut.txt create mode 100644 Documentation/devicetree/bindings/clock/milbeaut-clock.txt create mode 100644 Documentation/devicetree/bindings/pinctrl/socionext,milbeaut-pinctrl.txt create mode 100644 Documentation/devicetree/bindings/serial/milbeaut-uart.txt create mode 100644 Documentation/devicetree/bindings/sram/milbeaut-smp-sram.txt create mode 100644 Documentation/devicetree/bindings/timer/socionext,milbeaut-timer.txt create mode 100644 arch/arm/boot/dts/milbeaut-m10v-evb.dts create mode 100644 arch/arm/boot/dts/milbeaut-m10v.dtsi create mode 100644 arch/arm/configs/milbeaut_m10v_defconfig create mode 100644 arch/arm/mach-milbeaut/Kconfig create mode 100644 arch/arm/mach-milbeaut/Makefile create mode 100644 arch/arm/mach-milbeaut/platsmp.c create mode 100644 drivers/clk/clk-milbeaut.c create mode 100644 drivers/clocksource/timer-milbeaut.c create mode 100644 drivers/pinctrl/pinctrl-milbeaut.c create mode 100644 drivers/tty/serial/milbeaut_usio.c -- 1.9.1
