This adds optional regulator support to the pwm-fan driver. This is necessary for pwm fans which are powered by a switchable supply. Signed-off-by: Stefan Wahren <stefan.wahren@xxxxxxxx> --- drivers/hwmon/pwm-fan.c | 39 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 38 insertions(+), 1 deletion(-) diff --git a/drivers/hwmon/pwm-fan.c b/drivers/hwmon/pwm-fan.c index 2c94482..344915c 100644 --- a/drivers/hwmon/pwm-fan.c +++ b/drivers/hwmon/pwm-fan.c @@ -23,6 +23,7 @@ #include <linux/of.h> #include <linux/platform_device.h> #include <linux/pwm.h> +#include <linux/regulator/consumer.h> #include <linux/sysfs.h> #include <linux/thermal.h> @@ -31,6 +32,7 @@ struct pwm_fan_ctx { struct mutex lock; struct pwm_device *pwm; + struct regulator *reg_en; unsigned int pwm_value; unsigned int pwm_fan_state; unsigned int pwm_fan_max_state; @@ -231,6 +233,21 @@ static int pwm_fan_probe(struct platform_device *pdev) platform_set_drvdata(pdev, ctx); + ctx->reg_en = devm_regulator_get_optional(&pdev->dev, "fan"); + if (IS_ERR(ctx->reg_en)) { + if (PTR_ERR(ctx->reg_en) == -ENODEV) + ctx->reg_en = NULL; + else + return PTR_ERR(ctx->reg_en); + } else { + ret = regulator_enable(ctx->reg_en); + if (ret) { + dev_err(&pdev->dev, + "Failed to enable fan supply: %d\n", ret); + return ret; + } + } + ctx->pwm_value = MAX_PWM; /* Set duty cycle to maximum allowed and enable PWM output */ @@ -241,7 +258,7 @@ static int pwm_fan_probe(struct platform_device *pdev) ret = pwm_apply_state(ctx->pwm, &state); if (ret) { dev_err(&pdev->dev, "Failed to configure PWM\n"); - return ret; + goto err_reg_disable; } hwmon = devm_hwmon_device_register_with_groups(&pdev->dev, "pwmfan", @@ -277,6 +294,10 @@ static int pwm_fan_probe(struct platform_device *pdev) state.enabled = false; pwm_apply_state(ctx->pwm, &state); +err_reg_disable: + if (ctx->reg_en) + regulator_disable(ctx->reg_en); + return ret; } @@ -287,6 +308,10 @@ static int pwm_fan_remove(struct platform_device *pdev) thermal_cooling_device_unregister(ctx->cdev); if (ctx->pwm_value) pwm_disable(ctx->pwm); + + if (ctx->reg_en) + regulator_disable(ctx->reg_en); + return 0; } @@ -299,6 +324,12 @@ static int pwm_fan_suspend(struct device *dev) pwm_get_args(ctx->pwm, &args); + if (ctx->reg_en) { + ret = regulator_disable(ctx->reg_en); + if (ret) + dev_err(dev, "Failed to disable fan supply: %d\n", ret); + } + if (ctx->pwm_value) { ret = pwm_config(ctx->pwm, 0, args.period); if (ret < 0) @@ -317,6 +348,12 @@ static int pwm_fan_resume(struct device *dev) unsigned long duty; int ret; + if (ctx->reg_en) { + ret = regulator_enable(ctx->reg_en); + if (ret) + dev_err(dev, "Failed to enable fan supply: %d\n", ret); + } + if (ctx->pwm_value == 0) return 0; -- 2.7.4