On Tue 05 Feb 11:00 PST 2019, Nicolas Dechesne wrote:
> Hey Mani,
>
> thanks for sending this out, it should have been just like that in the
> first place ;)
>
Thanks Nico for the confirmation, I will queue this for v5.2
Regards,
Bjorn
> On Fri, Dec 21, 2018 at 3:36 AM Manivannan Sadhasivam
> <manivannan.sadhasivam@xxxxxxxxxx> wrote:
> >
> > On Mon, Oct 29, 2018 at 03:12:45PM +0530, Manivannan Sadhasivam wrote:
> > > For all 96Boards, the following standard is used for onboard LEDs.
> > >
> > > green:user1 default-trigger: heartbeat
> > > green:user2 default-trigger: mmc0/disk-activity(onboard-storage)
> > > green:user3 default-trigger: mmc1 (SD-card)
> > > green:user4 default-trigger: none, panic-indicator
> > > yellow:wlan default-trigger: phy0tx
> > > blue:bt default-trigger: hci0-power
> > >
> > > So lets adopt the same for APQ8016 SBC (Dragonboard410c), which is
> > > one of the 96Boards CE platform.
> > >
> >
> > Hello,
> >
> > Any update on this patch?
>
> Reviewed-by: Nicolas Dechesne <nicolas.dechesne@xxxxxxxxxx>
>
> >
> > Regards,
> > Mani
> >
> > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> > > Acked-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
> > > ---
> > > arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 12 ++++++------
> > > 1 file changed, 6 insertions(+), 6 deletions(-)
> > >
> > > diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> > > index 46feedf7c989..35f95154316b 100644
> > > --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> > > +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> > > @@ -300,28 +300,28 @@
> > > compatible = "gpio-leds";
> > >
> > > led@1 {
> > > - label = "apq8016-sbc:green:user1";
> > > + label = "green:user1";
> > > gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>;
> > > linux,default-trigger = "heartbeat";
> > > default-state = "off";
> > > };
> > >
> > > led@2 {
> > > - label = "apq8016-sbc:green:user2";
> > > + label = "green:user2";
> > > gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>;
> > > linux,default-trigger = "mmc0";
> > > default-state = "off";
> > > };
> > >
> > > led@3 {
> > > - label = "apq8016-sbc:green:user3";
> > > + label = "green:user3";
> > > gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>;
> > > linux,default-trigger = "mmc1";
> > > default-state = "off";
> > > };
> > >
> > > led@4 {
> > > - label = "apq8016-sbc:green:user4";
> > > + label = "green:user4";
> > > gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>;
> > > linux,default-trigger = "none";
> > > panic-indicator;
> > > @@ -329,14 +329,14 @@
> > > };
> > >
> > > led@5 {
> > > - label = "apq8016-sbc:yellow:wlan";
> > > + label = "yellow:wlan";
> > > gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>;
> > > linux,default-trigger = "phy0tx";
> > > default-state = "off";
> > > };
> > >
> > > led@6 {
> > > - label = "apq8016-sbc:blue:bt";
> > > + label = "blue:bt";
> > > gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>;
> > > linux,default-trigger = "bluetooth-power";
> > > default-state = "off";
> > > --
> > > 2.17.1
> > >
