On Mon, Oct 29, 2018 at 03:12:45PM +0530, Manivannan Sadhasivam wrote:
> For all 96Boards, the following standard is used for onboard LEDs.
>
> green:user1 default-trigger: heartbeat
> green:user2 default-trigger: mmc0/disk-activity(onboard-storage)
> green:user3 default-trigger: mmc1 (SD-card)
> green:user4 default-trigger: none, panic-indicator
> yellow:wlan default-trigger: phy0tx
> blue:bt default-trigger: hci0-power
>
> So lets adopt the same for APQ8016 SBC (Dragonboard410c), which is
> one of the 96Boards CE platform.
>
Hello,
Any update on this patch?
Regards,
Mani
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> Acked-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> index 46feedf7c989..35f95154316b 100644
> --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> @@ -300,28 +300,28 @@
> compatible = "gpio-leds";
>
> led@1 {
> - label = "apq8016-sbc:green:user1";
> + label = "green:user1";
> gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>;
> linux,default-trigger = "heartbeat";
> default-state = "off";
> };
>
> led@2 {
> - label = "apq8016-sbc:green:user2";
> + label = "green:user2";
> gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>;
> linux,default-trigger = "mmc0";
> default-state = "off";
> };
>
> led@3 {
> - label = "apq8016-sbc:green:user3";
> + label = "green:user3";
> gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>;
> linux,default-trigger = "mmc1";
> default-state = "off";
> };
>
> led@4 {
> - label = "apq8016-sbc:green:user4";
> + label = "green:user4";
> gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>;
> linux,default-trigger = "none";
> panic-indicator;
> @@ -329,14 +329,14 @@
> };
>
> led@5 {
> - label = "apq8016-sbc:yellow:wlan";
> + label = "yellow:wlan";
> gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>;
> linux,default-trigger = "phy0tx";
> default-state = "off";
> };
>
> led@6 {
> - label = "apq8016-sbc:blue:bt";
> + label = "blue:bt";
> gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>;
> linux,default-trigger = "bluetooth-power";
> default-state = "off";
> --
> 2.17.1
>
