Typo in title, it's a v1 not a v2. On 2/5/19 10:07 AM, Alexandre Torgue wrote:
This patch series add support of two new discovery boards based on STM32MP157 MPU: stm32mp157a-dk1 and stm32mp157c-dk2. stm32mp157a-dk1 board embeds a STM32MP157a SOC with AC package (TFBGA361, 148 ios) and 512MB of DDR3. Several connections are available on this boards: 4*USB2.0, 1*USB2.0 typeC, SDcard, RJ45, HDMI, Arduino connector, ... stm32mp157c-dk2 board complements stm32mp157a-dk1 board with a display panel (otm8009a) and a Murata Wifi/BT combo. It embeds a STM32MP157c SOC with AC package. Those patches enable basic support for a kernel boot. regards Alex Alexandre Torgue (2): ARM: dts: stm32: add initial support of stm32mp157a-dk1 board ARM: dts: stm32: add initial support of stm32mp157c-dk2 board arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/stm32mp157a-dk1.dts | 77 +++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/stm32mp157c-dk2.dts | 75 ++++++++++++++++++++++++++++++++++ 3 files changed, 154 insertions(+) create mode 100644 arch/arm/boot/dts/stm32mp157a-dk1.dts create mode 100644 arch/arm/boot/dts/stm32mp157c-dk2.dts
