From: Rajan Vaja <rajan.vaja@xxxxxxxxxx>
Add documentation to describe ZynqMP power domain bindings.
Signed-off-by: Rajan Vaja <rajan.vaja@xxxxxxxxxx>
Signed-off-by: Jolly Shah <jollys@xxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
---
.../bindings/power/xlnx,zynqmp-genpd.txt | 34 +++++++++++++++++++
include/dt-bindings/power/xlnx-zynqmp-power.h | 39 ++++++++++++++++++++++
2 files changed, 73 insertions(+)
create mode 100644 Documentation/devicetree/bindings/power/xlnx,zynqmp-genpd.txt
create mode 100644 include/dt-bindings/power/xlnx-zynqmp-power.h
diff --git a/Documentation/devicetree/bindings/power/xlnx,zynqmp-genpd.txt b/Documentation/devicetree/bindings/power/xlnx,zynqmp-genpd.txt
new file mode 100644
index 0000000..3c7f237
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/xlnx,zynqmp-genpd.txt
@@ -0,0 +1,34 @@
+-----------------------------------------------------------
+Device Tree Bindings for the Xilinx Zynq MPSoC PM domains
+-----------------------------------------------------------
+The binding for zynqmp-power-controller follow the common
+generic PM domain binding[1].
+
+[1] Documentation/devicetree/bindings/power/power_domain.txt
+
+== Zynq MPSoC Generic PM Domain Node ==
+
+Required property:
+ - Below property should be in zynqmp-firmware node.
+ - #power-domain-cells: Number of cells in a PM domain specifier. Must be 1.
+
+Power domain ID indexes are mentioned in
+include/dt-bindings/power/xlnx-zynqmp-power.h.
+
+-------
+Example
+-------
+
+firmware {
+ zynqmp_firmware: zynqmp-firmware {
+ ...
+ #power-domain-cells = <1>;
+ ...
+ };
+};
+
+sata {
+ ...
+ power-domains = <&zynqmp_firmware 28>;
+ ...
+};
diff --git a/include/dt-bindings/power/xlnx-zynqmp-power.h b/include/dt-bindings/power/xlnx-zynqmp-power.h
new file mode 100644
index 0000000..0d9a412
--- /dev/null
+++ b/include/dt-bindings/power/xlnx-zynqmp-power.h
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 Xilinx, Inc.
+ */
+
+#ifndef _DT_BINDINGS_ZYNQMP_POWER_H
+#define _DT_BINDINGS_ZYNQMP_POWER_H
+
+#define PD_USB_0 22
+#define PD_USB_1 23
+#define PD_TTC_0 24
+#define PD_TTC_1 25
+#define PD_TTC_2 26
+#define PD_TTC_3 27
+#define PD_SATA 28
+#define PD_ETH_0 29
+#define PD_ETH_1 30
+#define PD_ETH_2 31
+#define PD_ETH_3 32
+#define PD_UART_0 33
+#define PD_UART_1 34
+#define PD_SPI_0 35
+#define PD_SPI_1 36
+#define PD_I2C_0 37
+#define PD_I2C_1 38
+#define PD_SD_0 39
+#define PD_SD_1 40
+#define PD_DP 41
+#define PD_GDMA 42
+#define PD_ADMA 43
+#define PD_NAND 44
+#define PD_QSPI 45
+#define PD_GPIO 46
+#define PD_CAN_0 47
+#define PD_CAN_1 48
+#define PD_GPU 58
+#define PD_PCIE 59
+
+#endif
--
2.7.4
