On Wed, Jan 30, 2019 at 9:21 PM Lucas Stach <l.stach@xxxxxxxxxxxxxx> wrote: > > Am Mittwoch, den 30.01.2019, 13:05 +0000 schrieb Aisheng Dong: > > One irqsteer channel can support up to 8 output interrupts. > > > > > Cc: Marc Zyngier <marc.zyngier@xxxxxxx> > > > Cc: Rob Herring <robh+dt@xxxxxxxxxx> > > > Cc: Lucas Stach <l.stach@xxxxxxxxxxxxxx> > > > Cc: Shawn Guo <shawnguo@xxxxxxxxxx> > > Cc: devicetree@xxxxxxxxxxxxxxx > > > Signed-off-by: Dong Aisheng <aisheng.dong@xxxxxxx> > > --- > > ChangeLog: > > v1->v2: > > * remove one unnecessary note. > > --- > > .../devicetree/bindings/interrupt-controller/fsl,irqsteer.txt | 5 +++-- > > 1 file changed, 3 insertions(+), 2 deletions(-) > > > > diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt > > index 6d0a41b..984ab92 100644 > > --- a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt > > +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt > > @@ -6,8 +6,9 @@ Required properties: > > > - "fsl,imx8m-irqsteer" > > > - "fsl,imx-irqsteer" > > - reg: Physical base address and size of registers. > > -- interrupts: Should contain the parent interrupt line used to multiplex the > > - input interrupts. > > +- interrupts: Should contain the up to 8 parent interrupt lines used to > > + multiplex the input interrupts. They should be sepcified seqencially > > Typos here, should be: "specified sequentially" > Nice catch. Will update in new version. Thanks Regards Dong Aisheng > > + from output 0 to 7. > > - clocks: Should contain one clock for entry in clock-names > > see Documentation/devicetree/bindings/clock/clock-bindings.txt > > - clock-names:
