One irqsteer channel can support up to 8 output interrupts. Cc: Marc Zyngier <marc.zyngier@xxxxxxx> Cc: Rob Herring <robh+dt@xxxxxxxxxx> Cc: Lucas Stach <l.stach@xxxxxxxxxxxxxx> Cc: Shawn Guo <shawnguo@xxxxxxxxxx> Cc: devicetree@xxxxxxxxxxxxxxx Signed-off-by: Dong Aisheng <aisheng.dong@xxxxxxx> --- ChangeLog: v1->v2: * remove one unnecessary note. --- .../devicetree/bindings/interrupt-controller/fsl,irqsteer.txt | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt index 6d0a41b..984ab92 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt @@ -6,8 +6,9 @@ Required properties: - "fsl,imx8m-irqsteer" - "fsl,imx-irqsteer" - reg: Physical base address and size of registers. -- interrupts: Should contain the parent interrupt line used to multiplex the - input interrupts. +- interrupts: Should contain the up to 8 parent interrupt lines used to + multiplex the input interrupts. They should be sepcified seqencially + from output 0 to 7. - clocks: Should contain one clock for entry in clock-names see Documentation/devicetree/bindings/clock/clock-bindings.txt - clock-names: -- 2.7.4
