Re: [PATCH 1/3] cpufreq: mediatek: add mt8183 cpufreq support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 29-01-19, 14:35, Andrew-sh Cheng wrote:
> From: "Andrew-sh.Cheng" <andrew-sh.cheng@xxxxxxxxxxxx>
> 
> For new mediatek chip mt8183,
> cci and little cluster share the same buck,
> so need to modify the attribute of regulator from exclusive to optional
> 
> Intermediate clock is not always enabled by ccf in different projects,
> so cpufreq should always enable it by itself.
> 
> Signed-off-by: Andrew-sh.Cheng <andrew-sh.cheng@xxxxxxxxxxxx>
> ---
>  drivers/cpufreq/cpufreq-dt-platdev.c | 1 +
>  drivers/cpufreq/mediatek-cpufreq.c   | 7 ++++++-
>  2 files changed, 7 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
> index b1c5468..5a1c588 100644
> --- a/drivers/cpufreq/cpufreq-dt-platdev.c
> +++ b/drivers/cpufreq/cpufreq-dt-platdev.c
> @@ -117,6 +117,7 @@
>  	{ .compatible = "mediatek,mt817x", },
>  	{ .compatible = "mediatek,mt8173", },
>  	{ .compatible = "mediatek,mt8176", },
> +	{ .compatible = "mediatek,mt8183", },
>  
>  	{ .compatible = "nvidia,tegra124", },
>  
> diff --git a/drivers/cpufreq/mediatek-cpufreq.c b/drivers/cpufreq/mediatek-cpufreq.c
> index eb8920d..e956248 100644
> --- a/drivers/cpufreq/mediatek-cpufreq.c
> +++ b/drivers/cpufreq/mediatek-cpufreq.c
> @@ -355,7 +355,7 @@ static int mtk_cpu_dvfs_info_init(struct mtk_cpu_dvfs_info *info, int cpu)
>  		goto out_free_resources;
>  	}
>  
> -	proc_reg = regulator_get_exclusive(cpu_dev, "proc");
> +	proc_reg = regulator_get_optional(cpu_dev, "proc");
>  	if (IS_ERR(proc_reg)) {
>  		if (PTR_ERR(proc_reg) == -EPROBE_DEFER)
>  			pr_warn("proc regulator for cpu%d not ready, retry.\n",
> @@ -385,6 +385,9 @@ static int mtk_cpu_dvfs_info_init(struct mtk_cpu_dvfs_info *info, int cpu)
>  		goto out_free_resources;
>  	}
>  
> +	ret = clk_prepare_enable(inter_clk);
> +	if (ret)
> +		goto out_free_resources;

Add a blank line here please.

Also out_free_resources isn't enough here and you need to free OPP table as
well.


>  	/* Search a safe voltage for intermediate frequency. */
>  	rate = clk_get_rate(inter_clk);
>  	opp = dev_pm_opp_find_freq_ceil(cpu_dev, &rate);
> @@ -412,6 +415,7 @@ static int mtk_cpu_dvfs_info_init(struct mtk_cpu_dvfs_info *info, int cpu)
>  
>  out_free_opp_table:
>  	dev_pm_opp_of_cpumask_remove_table(&info->cpus);
> +	clk_disable_unprepare(inter_clk);

Clock was enabled after adding the table, and so it must be disabled before
removing the table. Just the opposite sequence.

>  
>  out_free_resources:
>  	if (!IS_ERR(proc_reg))
> @@ -551,6 +555,7 @@ static int mtk_cpufreq_probe(struct platform_device *pdev)
>  	{ .compatible = "mediatek,mt817x", },
>  	{ .compatible = "mediatek,mt8173", },
>  	{ .compatible = "mediatek,mt8176", },
> +	{ .compatible = "mediatek,mt8183", },
>  
>  	{ }
>  };
> -- 
> 1.8.1.1.dirty

-- 
viresh



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux