On Fri, Jan 25, 2019 at 12:55:10PM +0000, Carlo Caione wrote: > SmartEEE, compatible with IEEE802.3az standard, is designed to include > legacy MAC without EEE capability into the power saving system. SmartEEE > is enabled by default configuration on AR8031 after power-on or hardware > reset. > > Unfortunately this is proved causing issues for certain hw > configurations. We add a quirk to optionally disable SmartEEE. It may be a good idea to detail what "certain hw configurations" are and/or what the "issues" are, so it's easier to find this if/when others encounter the same issue. > > PATCH 3/3 depends on https://patchwork.kernel.org/patch/10781297/ > > > Carlo Caione (3): > net: phy: at803x: Introduce quirk to disable SmartEEE > dt-bindings: net: at803x: Document at803x,smarteee-disabled property > arm64: dts: imx8mq-evk: Disable SmartEEE > > .../devicetree/bindings/net/at803x.txt | 18 +++++++++++++++ > arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 1 + > drivers/net/phy/at803x.c | 22 +++++++++++++++++++ > 3 files changed, 41 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/at803x.txt > > -- > 2.19.1 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel > -- RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up According to speedtest.net: 11.9Mbps down 500kbps up
