You dropped the version tag that doesn't reflect that is a newer one
and that would be easily ignored by other people
On Thu, Jan 24, 2019 at 2:46 AM <shun-chih.yu@xxxxxxxxxxxx> wrote:
>
> From: Shun-Chih Yu <shun-chih.yu@xxxxxxxxxxxx>
>
> Document the devicetree bindings for MediaTek Command-Queue DMA controller
> which could be found on MT6765 SoC or other similar Mediatek SoCs.
>
> Signed-off-by: Shun-Chih Yu <shun-chih.yu@xxxxxxxxxxxx>
> Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
otherwise, Acked-by: Sean Wang <sean.wang@xxxxxxxxxx>
> ---
> .../devicetree/bindings/dma/mtk-cqdma.txt | 31 ++++++++++++++++++++
> 1 file changed, 31 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/dma/mtk-cqdma.txt
>
> diff --git a/Documentation/devicetree/bindings/dma/mtk-cqdma.txt b/Documentation/devicetree/bindings/dma/mtk-cqdma.txt
> new file mode 100644
> index 0000000..fb12927
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dma/mtk-cqdma.txt
> @@ -0,0 +1,31 @@
> +MediaTek Command-Queue DMA Controller
> +==================================
> +
> +Required properties:
> +
> +- compatible: Must be "mediatek,mt6765-cqdma" for MT6765.
> +- reg: Should contain the base address and length for each channel.
> +- interrupts: Should contain references to the interrupts for each channel.
> +- clocks: Should be the clock specifiers corresponding to the entry in
> + clock-names property.
> +- clock-names: Should contain "cqdma" entries.
> +- dma-channels: The number of DMA channels supported by the controller.
> +- dma-requests: The number of DMA request supported by the controller.
> +- #dma-cells: The length of the DMA specifier, must be <1>. This one cell
> + in dmas property of a client device represents the channel
> + number.
> +Example:
> +
> + cqdma: dma-controller@10212000 {
> + compatible = "mediatek,mt6765-cqdma";
> + reg = <0 0x10212000 0 0x1000>;
> + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_SPI 114 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&infracfg CLK_IFR_CQ_DMA>;
> + clock-names = "cqdma";
> + dma-channels = <2>;
> + dma-requests = <32>;
> + #dma-cells = <1>;
> + };
> +
> +DMA clients must use the format described in dma/dma.txt file.
> --
> 1.7.9.5
>
>
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-mediatek
