From: Shun-Chih Yu <shun-chih.yu@xxxxxxxxxxxx>
Document the devicetree bindings for MediaTek Command-Queue DMA controller
which could be found on MT6765 SoC or other similar Mediatek SoCs.
Signed-off-by: Shun-Chih Yu <shun-chih.yu@xxxxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
---
.../devicetree/bindings/dma/mtk-cqdma.txt | 31 ++++++++++++++++++++
1 file changed, 31 insertions(+)
create mode 100644 Documentation/devicetree/bindings/dma/mtk-cqdma.txt
diff --git a/Documentation/devicetree/bindings/dma/mtk-cqdma.txt b/Documentation/devicetree/bindings/dma/mtk-cqdma.txt
new file mode 100644
index 0000000..fb12927
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/mtk-cqdma.txt
@@ -0,0 +1,31 @@
+MediaTek Command-Queue DMA Controller
+==================================
+
+Required properties:
+
+- compatible: Must be "mediatek,mt6765-cqdma" for MT6765.
+- reg: Should contain the base address and length for each channel.
+- interrupts: Should contain references to the interrupts for each channel.
+- clocks: Should be the clock specifiers corresponding to the entry in
+ clock-names property.
+- clock-names: Should contain "cqdma" entries.
+- dma-channels: The number of DMA channels supported by the controller.
+- dma-requests: The number of DMA request supported by the controller.
+- #dma-cells: The length of the DMA specifier, must be <1>. This one cell
+ in dmas property of a client device represents the channel
+ number.
+Example:
+
+ cqdma: dma-controller@10212000 {
+ compatible = "mediatek,mt6765-cqdma";
+ reg = <0 0x10212000 0 0x1000>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_IFR_CQ_DMA>;
+ clock-names = "cqdma";
+ dma-channels = <2>;
+ dma-requests = <32>;
+ #dma-cells = <1>;
+ };
+
+DMA clients must use the format described in dma/dma.txt file.
--
1.7.9.5
