This series provides basic USB support for MSM8998. Currently missing is wiring up the Type-C detection logic so that the controller can correctly switch between host and peripheral modes. Work to implement that is ongoing, and expected to appear soon in followup patches. Also missing is Display Port (DP) support which apparently is different from sdm845 and needs additional investigation. v3: -Dropped accepted phy changes -Changed DT node labels per discussion with Bjorn -Made DT reg property addresses fill width -Added Bjorn's reviewed-by v2: -Fixed typo in QUSB2 bindings changes -Split out bindings changes -Fixed dual lane support in QMP to reflect Doug's updates -Dropped the clock fixes which were accepted Jeffrey Hugo (6): clk: qcom: Add missing freq for usb30_master_clk on 8998 clk: qcom: Skip halt checks on gcc_usb3_phy_pipe_clk for 8998 phy: qcom-qusb2: Add QUSB2 PHY support for msm8998 phy: qcom-qmp: Add QMP V3 USB3 PHY support for msm8998 usb: dwc3: qcom: Add support for MSM8998 arm64: dts: qcom: msm8998: Add USB-related nodes .../devicetree/bindings/phy/qcom-qmp-phy.txt | 5 + .../devicetree/bindings/phy/qcom-qusb2-phy.txt | 1 + .../devicetree/bindings/usb/qcom,dwc3.txt | 1 + arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi | 22 ++++ arch/arm64/boot/dts/qcom/msm8998.dtsi | 90 +++++++++++++ drivers/clk/qcom/gcc-msm8998.c | 3 +- drivers/phy/qualcomm/phy-qcom-qmp.c | 142 +++++++++++++++++++++ drivers/phy/qualcomm/phy-qcom-qmp.h | 4 + drivers/phy/qualcomm/phy-qcom-qusb2.c | 41 ++++++ drivers/usb/dwc3/dwc3-qcom.c | 1 + 10 files changed, 309 insertions(+), 1 deletion(-) -- Qualcomm Datacenter Technologies as an affiliate of Qualcomm Technologies, Inc. Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.
