Re: [PATCH v2 0/3] Add ZynqMP VCU/Allegro DVT H.264 encoder driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Hans,

On Fri, 18 Jan 2019 15:11:32 +0100, Hans Verkuil wrote:
> Hi Michael,
> 
> On 1/18/19 2:37 PM, Michael Tretter wrote:
> > This is v2 of the series to add support for the Allegro DVT H.264 encoder
> > found in the EV family of the Xilinx ZynqMP platform.
> > 
> > See v1 [0] of the patch series for a description of the hardware.
> > 
> > I fixed the handling of frames with various sizes and driver is now able to
> > encode H.264 video in the baseline profile up to 1920x1080 pixels. I also
> > addressed the issues reported by the kbuild robot for the previous series,
> > implemented a few extended controls and changed the interface to the mcu to
> > follow the register documentation rather than the downstream driver
> > implementation.
> > 
> > I would especially appreciate feedback to the device tree bindings and the
> > overall architecture of the driver.  
> 
> I'll try to review this next week. Ping me if you didn't see a review by the
> end of next week.
> 
> BTW, can you post the output of 'v4l2-compliance -s'? (make sure you use the
> very latest version of v4l2-compliance!)

Thanks, here is the output of v4l2-compliance. I haven't used
v4l2-compliance with the -s switch yet and will look into the reported
failures for the streaming ioctls.

v4l2-compliance SHA: e07d1b90190f2b98fe4f5be20406b49ecbe5b3e7, 64 bits

Compliance test for allegro device /dev/video4:

Driver Info:
	Driver name      : allegro
	Card type        : Allegro DVT Video Encoder
	Bus info         : platform:a0009000.al5e
	Driver version   : 5.0.0
	Capabilities     : 0x84208000
		Video Memory-to-Memory
		Streaming
		Extended Pix Format
		Device Capabilities
	Device Caps      : 0x04208000
		Video Memory-to-Memory
		Streaming
		Extended Pix Format

Required ioctls:
	test VIDIOC_QUERYCAP: OK

Allow for multiple opens:
	test second /dev/video4 open: OK
	test VIDIOC_QUERYCAP: OK
	test VIDIOC_G/S_PRIORITY: OK
	test for unlimited opens: OK

Debug ioctls:
	test VIDIOC_DBG_G/S_REGISTER: OK
	test VIDIOC_LOG_STATUS: OK (Not Supported)

Input ioctls:
	test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
	test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
	test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
	test VIDIOC_ENUMAUDIO: OK (Not Supported)
	test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
	test VIDIOC_G/S_AUDIO: OK (Not Supported)
	Inputs: 0 Audio Inputs: 0 Tuners: 0

Output ioctls:
	test VIDIOC_G/S_MODULATOR: OK (Not Supported)
	test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
	test VIDIOC_ENUMAUDOUT: OK (Not Supported)
	test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
	test VIDIOC_G/S_AUDOUT: OK (Not Supported)
	Outputs: 0 Audio Outputs: 0 Modulators: 0

Input/Output configuration ioctls:
	test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
	test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
	test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
	test VIDIOC_G/S_EDID: OK (Not Supported)

Control ioctls:
	test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
	test VIDIOC_QUERYCTRL: OK
	test VIDIOC_G/S_CTRL: OK
	test VIDIOC_G/S/TRY_EXT_CTRLS: OK
	test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
	test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
	Standard Controls: 8 Private Controls: 0

Format ioctls:
	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
	test VIDIOC_G/S_PARM: OK (Not Supported)
	test VIDIOC_G_FBUF: OK (Not Supported)
	test VIDIOC_G_FMT: OK
	test VIDIOC_TRY_FMT: OK
	test VIDIOC_S_FMT: OK
	test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
	test Cropping: OK (Not Supported)
	test Composing: OK (Not Supported)
	test Scaling: OK

Codec ioctls:
	test VIDIOC_(TRY_)ENCODER_CMD: OK
	test VIDIOC_G_ENC_INDEX: OK (Not Supported)
	test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)

Buffer ioctls:
	test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
	test VIDIOC_EXPBUF: OK
	test Requests: OK (Not Supported)

Test input 0:

Streaming ioctls:
	test read/write: OK (Not Supported)
		fail: v4l2-test-buffers.cpp(1920): pid != pid_streamoff
		fail: v4l2-test-buffers.cpp(1953): testBlockingDQBuf(node, q)
	test blocking wait: FAIL
		fail: v4l2-test-buffers.cpp(253): g_field() == V4L2_FIELD_ANY
		fail: v4l2-test-buffers.cpp(1157): buf.qbuf(node)
	test MMAP (no poll): FAIL
		fail: v4l2-test-buffers.cpp(253): g_field() == V4L2_FIELD_ANY
		fail: v4l2-test-buffers.cpp(1157): buf.qbuf(node)
	test MMAP (select): FAIL
	test USERPTR (no poll): OK (Not Supported)
	test USERPTR (select): OK (Not Supported)
	test DMABUF: Cannot test, specify --expbuf-device

Total for allegro device /dev/video4: 50, Succeeded: 47, Failed: 3, Warnings: 0

Michael

> 
> Regards,
> 
> 	Hans
> 
> > 
> > The driver still only works with the vcu-firmware release 2018.2. I am not yet
> > sure how to address the different firmware versions, because in addition to
> > the mailbox sizes, there are also changes within the messages themselves.
> > 
> > I also did not address the integration with the xlnx-vcu driver, yet.
> > 
> > Michael
> > 
> > [0] https://lore.kernel.org/linux-media/20190109113037.28430-1-m.tretter@xxxxxxxxxxxxxx/
> > 
> > Changes since v1:
> > - clean up debug log levels
> > - fix unused variable in allegro_mbox_init
> > - fix uninitialized variable in allegro_mbox_write
> > - fix global module parameters
> > - fix Kconfig dependencies
> > - return h264 as default codec for mcu
> > - implement device reset as documented
> > - document why irq does not wait for clear
> > - rename ENCODE_ONE_FRM to ENCODE_FRAME
> > - allow error codes for mcu_channel_id
> > - move control handler to channel
> > - add fw version check
> > - add support for colorspaces
> > - enable configuration of H.264 levels
> > - enable configuration of frame size
> > - enable configuration of bit rate and CPB size
> > - enable configuration of GOP size
> > - rework response handling
> > - fix missing error handling in allegro_h264_write_sps
> > 
> > Michael Tretter (3):
> >   media: dt-bindings: media: document allegro-dvt bindings
> >   [media] allegro: add Allegro DVT video IP core driver
> >   [media] allegro: add SPS/PPS nal unit writer
> > 
> >  .../devicetree/bindings/media/allegro.txt     |   35 +
> >  MAINTAINERS                                   |    6 +
> >  drivers/staging/media/Kconfig                 |    2 +
> >  drivers/staging/media/Makefile                |    1 +
> >  drivers/staging/media/allegro-dvt/Kconfig     |   16 +
> >  drivers/staging/media/allegro-dvt/Makefile    |    6 +
> >  .../staging/media/allegro-dvt/allegro-core.c  | 2828 +++++++++++++++++
> >  drivers/staging/media/allegro-dvt/nal-h264.c  | 1278 ++++++++
> >  drivers/staging/media/allegro-dvt/nal-h264.h  |  188 ++
> >  9 files changed, 4360 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/media/allegro.txt
> >  create mode 100644 drivers/staging/media/allegro-dvt/Kconfig
> >  create mode 100644 drivers/staging/media/allegro-dvt/Makefile
> >  create mode 100644 drivers/staging/media/allegro-dvt/allegro-core.c
> >  create mode 100644 drivers/staging/media/allegro-dvt/nal-h264.c
> >  create mode 100644 drivers/staging/media/allegro-dvt/nal-h264.h
> >   
> 
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux