[PATCH v6 2/6] media: sun6i: Add mod_rate quirk

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Unfortunately default CSI_SCLK rate cannot work properly to
drive the connected sensor interface, particularly on few
Allwinner SoC's like A64.

So, add mod_rate quirk via driver data so-that the respective
SoC's which require to alter the default mod clock rate can assign
the operating clock rate.

Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
---
 .../platform/sunxi/sun6i-csi/sun6i_csi.c      | 26 ++++++++++++++++---
 1 file changed, 22 insertions(+), 4 deletions(-)

diff --git a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
index ee882b66a5ea..a9aef630c3b4 100644
--- a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
+++ b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
@@ -15,6 +15,7 @@
 #include <linux/ioctl.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
@@ -28,8 +29,13 @@
 
 #define MODULE_NAME	"sun6i-csi"
 
+struct sun6i_csi_variant {
+	unsigned long			mod_rate;
+};
+
 struct sun6i_csi_dev {
 	struct sun6i_csi		csi;
+	const struct sun6i_csi_variant	*variant;
 	struct device			*dev;
 
 	struct regmap			*regmap;
@@ -161,15 +167,20 @@ int sun6i_csi_set_power(struct sun6i_csi *csi, bool enable)
 		regmap_update_bits(regmap, CSI_EN_REG, CSI_EN_CSI_EN, 0);
 
 		clk_disable_unprepare(sdev->clk_ram);
+		if (sdev->variant->mod_rate)
+			clk_rate_exclusive_put(sdev->clk_mod);
 		clk_disable_unprepare(sdev->clk_mod);
 		reset_control_assert(sdev->rstc_bus);
 		return 0;
 	}
 
+	if (sdev->variant->mod_rate)
+		clk_set_rate_exclusive(sdev->clk_mod, sdev->variant->mod_rate);
+
 	ret = clk_prepare_enable(sdev->clk_mod);
 	if (ret) {
 		dev_err(sdev->dev, "Enable csi clk err %d\n", ret);
-		return ret;
+		goto clk_mod_put;
 	}
 
 	ret = clk_prepare_enable(sdev->clk_ram);
@@ -192,6 +203,9 @@ int sun6i_csi_set_power(struct sun6i_csi *csi, bool enable)
 	clk_disable_unprepare(sdev->clk_ram);
 clk_mod_disable:
 	clk_disable_unprepare(sdev->clk_mod);
+clk_mod_put:
+	if (sdev->variant->mod_rate)
+		clk_rate_exclusive_put(sdev->clk_mod);
 	return ret;
 }
 
@@ -871,6 +885,7 @@ static int sun6i_csi_probe(struct platform_device *pdev)
 	sdev->dev = &pdev->dev;
 	/* The DMA bus has the memory mapped at 0 */
 	sdev->dev->dma_pfn_offset = PHYS_OFFSET >> PAGE_SHIFT;
+	sdev->variant = of_device_get_match_data(sdev->dev);
 
 	ret = sun6i_csi_resource_request(sdev, pdev);
 	if (ret)
@@ -891,10 +906,13 @@ static int sun6i_csi_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct sun6i_csi_variant sun6i_a31_csi = {
+};
+
 static const struct of_device_id sun6i_csi_of_match[] = {
-	{ .compatible = "allwinner,sun6i-a31-csi", },
-	{ .compatible = "allwinner,sun8i-h3-csi", },
-	{ .compatible = "allwinner,sun8i-v3s-csi", },
+	{ .compatible = "allwinner,sun6i-a31-csi", .data = &sun6i_a31_csi, },
+	{ .compatible = "allwinner,sun8i-h3-csi", .data = &sun6i_a31_csi, },
+	{ .compatible = "allwinner,sun8i-v3s-csi", .data = &sun6i_a31_csi, },
 	{},
 };
 MODULE_DEVICE_TABLE(of, sun6i_csi_of_match);
-- 
2.18.0.321.gffc6fa0e3




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux