Re: [PATCH v4 08/14] ARM: dts: qcom: pm8941: add interrupt controller properties

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun 13 Jan 07:47 PST 2019, Brian Masney wrote:

> Add interrupt controller properties now that spmi-gpio is a proper
> hierarchical IRQ chip. The interrupts property is no longer needed so
> remove it. Code was tested on the LG Nexus 5 (hammerhead) phone.
> 

Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>

> Signed-off-by: Brian Masney <masneyb@xxxxxxxxxxxxx>
> Reviewed-by: Stephen Boyd <sboyd@xxxxxxxxxx>
> ---
> Changes since v3:
> - None
> 
> Changes since v2:
> - Remove interrupt-parent property
> 
> Changes since v1:
> - Interrupts are now two cells instead of four cells.
> - Drop unnecessary interrupts property.
> 
>  arch/arm/boot/dts/qcom-pm8941.dtsi | 38 ++----------------------------
>  1 file changed, 2 insertions(+), 36 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
> index 2515c5c217ac..e65049e0fb45 100644
> --- a/arch/arm/boot/dts/qcom-pm8941.dtsi
> +++ b/arch/arm/boot/dts/qcom-pm8941.dtsi
> @@ -64,42 +64,8 @@
>  			reg = <0xc000>;
>  			gpio-controller;
>  			#gpio-cells = <2>;
> -			interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
> -				     <0 0xc1 0 IRQ_TYPE_NONE>,
> -				     <0 0xc2 0 IRQ_TYPE_NONE>,
> -				     <0 0xc3 0 IRQ_TYPE_NONE>,
> -				     <0 0xc4 0 IRQ_TYPE_NONE>,
> -				     <0 0xc5 0 IRQ_TYPE_NONE>,
> -				     <0 0xc6 0 IRQ_TYPE_NONE>,
> -				     <0 0xc7 0 IRQ_TYPE_NONE>,
> -				     <0 0xc8 0 IRQ_TYPE_NONE>,
> -				     <0 0xc9 0 IRQ_TYPE_NONE>,
> -				     <0 0xca 0 IRQ_TYPE_NONE>,
> -				     <0 0xcb 0 IRQ_TYPE_NONE>,
> -				     <0 0xcc 0 IRQ_TYPE_NONE>,
> -				     <0 0xcd 0 IRQ_TYPE_NONE>,
> -				     <0 0xce 0 IRQ_TYPE_NONE>,
> -				     <0 0xcf 0 IRQ_TYPE_NONE>,
> -				     <0 0xd0 0 IRQ_TYPE_NONE>,
> -				     <0 0xd1 0 IRQ_TYPE_NONE>,
> -				     <0 0xd2 0 IRQ_TYPE_NONE>,
> -				     <0 0xd3 0 IRQ_TYPE_NONE>,
> -				     <0 0xd4 0 IRQ_TYPE_NONE>,
> -				     <0 0xd5 0 IRQ_TYPE_NONE>,
> -				     <0 0xd6 0 IRQ_TYPE_NONE>,
> -				     <0 0xd7 0 IRQ_TYPE_NONE>,
> -				     <0 0xd8 0 IRQ_TYPE_NONE>,
> -				     <0 0xd9 0 IRQ_TYPE_NONE>,
> -				     <0 0xda 0 IRQ_TYPE_NONE>,
> -				     <0 0xdb 0 IRQ_TYPE_NONE>,
> -				     <0 0xdc 0 IRQ_TYPE_NONE>,
> -				     <0 0xdd 0 IRQ_TYPE_NONE>,
> -				     <0 0xde 0 IRQ_TYPE_NONE>,
> -				     <0 0xdf 0 IRQ_TYPE_NONE>,
> -				     <0 0xe0 0 IRQ_TYPE_NONE>,
> -				     <0 0xe1 0 IRQ_TYPE_NONE>,
> -				     <0 0xe2 0 IRQ_TYPE_NONE>,
> -				     <0 0xe3 0 IRQ_TYPE_NONE>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
>  
>  			boost_bypass_n_pin: boost-bypass {
>  				pins = "gpio21";
> -- 
> 2.17.2
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux