Re: [PATCH v2 2/2] dt-bindings: iio: chemical: Add bindings for bme680

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 1/12/19 1:28 PM, Jonathan Cameron wrote:
On Fri, 11 Jan 2019 15:53:59 -0500
Sebastien Bourdelin <sebastien.bourdelin@xxxxxxxxx> wrote:

BME680 is a pressure/temperature/humidity/voc sensor.

Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@xxxxxxxxx>
Hmm. We could add the VDD and VDIO regulators perhaps.
Driver assumes they are on currently but we'll get a board where control
is needed sooner or later.  I'm not that fussed about this though.

If that's fine with you, i prefer to leave it as it is right now as i don't feel

confident enough to correctly explain it in the Documentation.

But if you have more input, you are more then welcome!

Jonathan

---
  .../devicetree/bindings/iio/chemical/bme680.txt       | 11 +++++++++++
  1 file changed, 11 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/iio/chemical/bme680.txt

diff --git a/Documentation/devicetree/bindings/iio/chemical/bme680.txt b/Documentation/devicetree/bindings/iio/chemical/bme680.txt
new file mode 100644
index 000000000000..885a1b918340
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/chemical/bme680.txt
@@ -0,0 +1,11 @@
+Bosch Sensortec BME680 pressure/temperature/humidity/voc sensors
+
+Required properties:
+- compatible: must be "bosch,bme680"
+
+Example:
+
+bme680@77 {
+          compatible = "bosch,bme680";
+          reg = <0x77>;
+};



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux