According to the schematics for all RPis with a 40 pin header, the GPIOs 0 and 1 are labeled as ID_SD and ID_SC. In order to clarify that is a I2C bus, append the third letter. Signed-off-by: Stefan Wahren <stefan.wahren@xxxxxxxx> --- arch/arm/boot/dts/bcm2835-rpi-a-plus.dts | 4 ++-- arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 4 ++-- arch/arm/boot/dts/bcm2835-rpi-zero-w.dts | 4 ++-- arch/arm/boot/dts/bcm2835-rpi-zero.dts | 4 ++-- 4 files changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts index 2cd9c5e..db8a601 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts @@ -31,8 +31,8 @@ * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ - gpio-line-names = "SDA0", - "SCL0", + gpio-line-names = "ID_SDA", + "ID_SCL", "SDA1", "SCL1", "GPIO_GCLK", diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts index cfbdaac..1e40d67 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts @@ -33,8 +33,8 @@ * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ - gpio-line-names = "SDA0", - "SCL0", + gpio-line-names = "ID_SDA", + "ID_SCL", "SDA1", "SCL1", "GPIO_GCLK", diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts index 644d907..5765d34 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts @@ -40,8 +40,8 @@ * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ - gpio-line-names = "GPIO0", - "GPIO1", + gpio-line-names = "ID_SDA", + "ID_SCL", "SDA1", "SCL1", "GPIO_GCLK", diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/bcm2835-rpi-zero.dts index 00323ba..3b35a8a 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts @@ -28,8 +28,8 @@ * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ - gpio-line-names = "SDA0", - "SCL0", + gpio-line-names = "ID_SDA", + "ID_SCL", "SDA1", "SCL1", "GPIO_GCLK", -- 2.7.4
