This patch adds a DT binding documentation for
Cadence RTC controller.
Signed-off-by: Jan Kotas <jank@xxxxxxxxxxx>
---
Documentation/devicetree/bindings/rtc/cdns,rtc.txt | 25 ++++++++++++++++++++++
1 file changed, 25 insertions(+)
create mode 100644 Documentation/devicetree/bindings/rtc/cdns,rtc.txt
diff --git a/Documentation/devicetree/bindings/rtc/cdns,rtc.txt b/Documentation/devicetree/bindings/rtc/cdns,rtc.txt
new file mode 100644
index 000000000..40713bbbe
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/cdns,rtc.txt
@@ -0,0 +1,25 @@
+Cadence Real Time Clock
+
+The Cadence RTC controller with date, time and alarm capabilities.
+The alarm may wake the system from low-power state.
+
+Required properties:
+- compatible: Should be "cdns,rtc-r109v3"
+- reg: Specifies base physical address and size of the register area.
+- interrupts: A single interrupt specifier.
+- clocks: Must contain two entries:
+ - pclk: APB registers clock
+ - ref_clk: reference 1Hz of 100Hz clock, depending on IP configuration
+ See ../clocks/clock-bindings.txt for details.
+
+Example:
+ rtc0: rtc@fd080000 {
+ compatible = "cdns,rtc-r109v3";
+ reg = <0xfd080000 0x1000>;
+
+ clock-names = "pclk", "ref_clk";
+ clocks = <&sysclock>, <&refclock>;
+
+ interrupt-parent = <&gic>;
+ interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+ };
--
2.15.0
