From: Felix Fietkau <nbd@xxxxxxxx>
On AR934x, the MDIO reference clock can be configured to a fixed 100 MHz
clock. If that feature is not used, it defaults to the main reference
clock, like on all other SoC.
Signed-off-by: Felix Fietkau <nbd@xxxxxxxx>
Signed-off-by: John Crispin <john@xxxxxxxxxxx>
---
arch/mips/ath79/clock.c | 8 ++++++++
include/dt-bindings/clock/ath79-clk.h | 3 ++-
2 files changed, 10 insertions(+), 1 deletion(-)
diff --git a/arch/mips/ath79/clock.c b/arch/mips/ath79/clock.c
index c234818b30e1..699f00f096cb 100644
--- a/arch/mips/ath79/clock.c
+++ b/arch/mips/ath79/clock.c
@@ -42,6 +42,7 @@ static const char * const clk_names[ATH79_CLK_END] = {
[ATH79_CLK_DDR] = "ddr",
[ATH79_CLK_AHB] = "ahb",
[ATH79_CLK_REF] = "ref",
+ [ATH79_CLK_MDIO] = "mdio",
};
static const char * __init ath79_clk_name(int type)
@@ -342,6 +343,10 @@ static void __init ar934x_clocks_init(void __iomem *pll_base)
ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
+ clk_ctrl = __raw_readl(pll_base + AR934X_PLL_SWITCH_CLOCK_CONTROL_REG);
+ if (clk_ctrl & AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL)
+ ath79_set_clk(ATH79_CLK_MDIO, 100 * 1000 * 1000);
+
iounmap(dpll_base);
}
@@ -698,6 +703,9 @@ static void __init ath79_clocks_init_dt(struct device_node *np)
else if (of_device_is_compatible(np, "qca,qca9560-pll"))
qca956x_clocks_init(pll_base);
+ if (!clks[ATH79_CLK_MDIO])
+ clks[ATH79_CLK_MDIO] = clks[ATH79_CLK_REF];
+
if (of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data)) {
pr_err("%pOF: could not register clk provider\n", np);
goto err_iounmap;
diff --git a/include/dt-bindings/clock/ath79-clk.h b/include/dt-bindings/clock/ath79-clk.h
index 262d7c5eb248..dcc679a7ad85 100644
--- a/include/dt-bindings/clock/ath79-clk.h
+++ b/include/dt-bindings/clock/ath79-clk.h
@@ -14,7 +14,8 @@
#define ATH79_CLK_DDR 1
#define ATH79_CLK_AHB 2
#define ATH79_CLK_REF 3
+#define ATH79_CLK_MDIO 4
-#define ATH79_CLK_END 4
+#define ATH79_CLK_END 5
#endif /* __DT_BINDINGS_ATH79_CLK_H */
--
2.20.1
