On 1/9/19 11:57 AM, Wolfram Sang wrote: >> [ 3.373714] renesas_sdhi_internal_dmac ee100000.sd: mmc0 base at 0xee100000 max clock rate 200 MHz >> [ 3.456829] renesas_sdhi_internal_dmac ee120000.sd: mmc1 base at 0xee120000 max clock rate 200 MHz > > No mmc2 initialized. That should work regardless of eMMC. Probably > something wrong in the DT somewhere. Weird, it worked in next-20181102 with these patches, I just rechecked: 7818a9f06df1 mmc: renesas_sdhi: Whitelist R8A77990 SDHI a05a906776f8 pinctrl: sh-pfc: r8a77990: Add voltage switch operations for SDHI 2cc9d3a293e9 pinctrl: sh-pfc: r8a77990: Add SDHI pins, groups and functions 6b8d151613b7 pinctrl: sh-pfc: r8a77990: Add Audio SSI pins, groups and functions 9167b22938f7 pinctrl: sh-pfc: r8a77990: Add Audio clock pins, groups and functions 000cc50fc942 arm64: dts: r8a77990-ebisu: Enable HS200 of SDHI3 d3f59bbbf7ce arm64: dts: r8a77990-ebisu: Enable eMMC of SDHI3 5928c59bff8d arm64: dts: r8a77990-ebisu: Enable UHS-I of SDHI0 and SDHI1 dae32a3172b8 arm64: dts: r8a77990-ebisu: Enable SD card of SDHI0 and SDHI1 8feef039c6c6 arm64: dts: r8a77990: Add SDHI device nodes 25e9471b6a27 (tag: next-20181102) Add linux-next specific files for 20181102 I'll let you know once I figure it out. -- Best regards, Marek Vasut
