Add binding and driver for the QMP based side-channel communication mechanism to the AOSS, which is used to control resources not exposed through the RPMh interface. Currently implemented is a genpd provider, but pending some improvements in the thermal framework a cooling device will be added at a later point. Patch 7 is an "RFC" for how we define and probe these cooling devices. The remoteproc patches updates the MSS driver to vote for the necessary genpd corners on SDM845. Lastly patch 6 makes it possible to have a device on the amba bus where the apb_pclk is controlled as part of a power-domain. Bjorn Andersson (6): dt-bindings: soc: qcom: Add AOSS QMP binding soc: qcom: Add AOSS QMP communication driver soc: qcom: Add AOSS QMP genpd provider remoteproc: q6v5-mss: Active powerdomain for SDM845 amba: Allow pclk to be controlled by power domain soc: qcom: aoss-qmp: Add cooling device support Rajendra Nayak (1): remoteproc: q6v5-mss: Vote for rpmh power domains .../bindings/soc/qcom/qcom,aoss-qmp.txt | 75 ++++ drivers/amba/bus.c | 9 +- drivers/remoteproc/qcom_q6v5_mss.c | 142 ++++++- drivers/soc/qcom/Kconfig | 18 + drivers/soc/qcom/Makefile | 2 + drivers/soc/qcom/aoss-qmp-pd.c | 135 +++++++ drivers/soc/qcom/aoss-qmp.c | 349 ++++++++++++++++++ include/dt-bindings/power/qcom-aoss-qmp.h | 15 + include/linux/soc/qcom/aoss-qmp.h | 12 + 9 files changed, 751 insertions(+), 6 deletions(-) create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt create mode 100644 drivers/soc/qcom/aoss-qmp-pd.c create mode 100644 drivers/soc/qcom/aoss-qmp.c create mode 100644 include/dt-bindings/power/qcom-aoss-qmp.h create mode 100644 include/linux/soc/qcom/aoss-qmp.h -- 2.18.0
