The FT5726 controller has up to 72 channels, 42 Tx-channels and 30
Rx-channels. The recommended touchpoint size is less equal 11.6".
This adds the support for the FT5726 controller flashed with the
Evervision firmware.
Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
---
.../devicetree/bindings/input/touchscreen/edt-ft5x06.txt | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
index da2dc5d6c98b..179e434f5619 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
@@ -1,11 +1,12 @@
FocalTech EDT-FT5x06 Polytouch driver
=====================================
-There are 3 variants of the chip for various touch panel sizes
+There are 5 variants of the chip for various touch panel sizes
FT5206GE1 2.8" .. 3.8"
FT5306DE4 4.3" .. 7"
FT5406EE8 7" .. 8.9"
FT5506EEG 7" .. 8.9"
+FT5726NEI 5.7” .. 11.6"
The software interface is identical for all those chips, so that
currently there is no need for the driver to distinguish between the
@@ -19,6 +20,7 @@ Required properties:
or: "edt,edt-ft5306"
or: "edt,edt-ft5406"
or: "edt,edt-ft5506"
+ or: "evervision,ev-ft5726"
or: "focaltech,ft6236"
- reg: I2C slave address of the chip (0x38)
--
2.19.1
