Both mt8173 and mt8183 don't have this vld_pa_rng(valid physical address
range) register while mt2712 have. Move it into the plat_data.
Signed-off-by: Yong Wu <yong.wu@xxxxxxxxxxxx>
---
drivers/iommu/mtk_iommu.c | 3 ++-
drivers/iommu/mtk_iommu.h | 1 +
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 8d8ab21..2913ddb 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -548,7 +548,7 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
upper_32_bits(data->protect_base);
writel_relaxed(regval, data->base + REG_MMU_IVRP_PADDR);
- if (data->enable_4GB && data->plat_data->m4u_plat != M4U_MT8173) {
+ if (data->enable_4GB && data->plat_data->vld_pa_rng) {
/*
* If 4GB mode is enabled, the validate PA range is from
* 0x1_0000_0000 to 0x1_ffff_ffff. here record bit[32:30].
@@ -741,6 +741,7 @@ static int __maybe_unused mtk_iommu_resume(struct device *dev)
.m4u_plat = M4U_MT2712,
.has_4gb_mode = true,
.has_bclk = true,
+ .vld_pa_rng = true,
.larbid_remap = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9},
};
diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
index b46aeaa..a8c5d1e 100644
--- a/drivers/iommu/mtk_iommu.h
+++ b/drivers/iommu/mtk_iommu.h
@@ -48,6 +48,7 @@ struct mtk_iommu_plat_data {
/* HW will use the EMI clock if there isn't the "bclk". */
bool has_bclk;
bool reset_axi;
+ bool vld_pa_rng;
unsigned char larbid_remap[MTK_LARB_NR_MAX];
};
--
1.9.1
